Radial Direct Boxes

Passive Stereo DI with Isolation Transformer, 15dB Pad, and Lift Switch

Passive Mono Direct Box with Custom Transformer and Rugged I-beam Construction

Passive 2-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors

Phantom-powered High-resolution Active Direct Box with -15dB Pad for Passive Guitars and Basses

Stereo USB Laptop DI Box with 24bit/96k Converters, 2 Balanced Outputs Balanced lo-Z Outputs with Switchable Isolation, and Built-in Headphone Amp

Passive Mono Direct Box with Jensen Transformer and Rugged I-beam Construction

Passive Re-amping Device with Custom Transformers

Transformer-equipped Passive Stereo DI

Active 48-volt Phantom-powered Direct Box

Passive 1-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors

Passive Direct Box with Eclipse ET-DB3 Transformer, Stereo-to-mono Merge, and 15dB Pad

Active Stereo Re-amping Device with Variable Output and Stereo Effects Loop

Passive Re-amping Device, Variable Output, Custom Transformer, 3-way Filter Switch, Phase Inverter, and Ground Lift

Low-noise 1-in/3-out (1 Isolated and 2 Through) Passive Microphone Splitter with Eclipse ET-MS10 Transformer, Switchable Ground Lifts, and -30dB Switchable Pad on Input

Instrument Line Driver System with SGI-RX Receiver and SGI-TX Transmitter

Active 48-volt Phantom-powered Stereo Direct Box

XLR Line Isolator Designed to Handle Balanced and Unbalanced Audio Signals at Any Volume Level

Signal Driver with Level Matching from -10dB to +4dB

Direct Box with Optimized for Orchestral Instruments with Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter

Stereo Passive Line Isolator with 1:1 Transformers, Sum Switch, and Ground Lift

2-channel Passive Stereo Line Isolator with Polarity Switch, Dual Ground-lift Switches, and -15dB Pad

2-channel Acoustic Preamp and DI with Phantom Power, 3 Band EQ, Switchable Filter, Piezo Boost, FX Loop, and Wet/Dry Blend

Active Re-amping Device with Class-A Signal Path, Variable Output, and Ground Loop Elimination

Active Direct Box, 48V Phantom Powered, with 800k-ohm Input Impedance, Polarity Switch, and 15dB Pad

2-channel Line-level Isolator for Balanced and Unbalanced Signals

1-channel Active Direct Box with HPF, Polarity Switch, and Add'l 1/4" Aux Output - For Piezo Pickups

2-channel Passive Stereo +4dB to -10dB Isolator and Converter with Ground Lift and Variable Output Level Control

Low-noise 1-in/2-out (1 Isolated, 1 Through) Passive Microphone Splitter with Jensen Transformer, Switchable Ground Lifts, and -30dB Switchable Pad on Input

Stereo Passive DI with Level Control, Mono Merge, and 1/4", RCA, and 1/8" TRS Input Connectors

1-in, 14-out Passive Line-level Splitter with Trim Pots and XLR Through for Daisy Chaining

Active Reamping Device with XLR Input, 1/4" TRS Input, 3.5mm Input, 3-position Filter, Buffer, Pad, and Mute Switches, and 48V Phantom Power

2-channel Passive Mic/Line Splitter with Jensen Transformer and Atttenuator

Stereo Passive +4dB to -10dB Converter with Jensen Transformers

Active Combination Stereo RIAA turntable Preamp and Direct Box, PSU Included

Stereo Instrument Line Driver System with SGI TX Transmitter and SGI RX Receiver

Passive Reamping Device with 1/4" Input, 3.5mm Input, Isolation Transformer, and Ground Lift Switch

Active Re-amping Device with Variable Output, and Dual Effects Loops

Passive Line Isolator with 1:1 Transformers, Sum Switch, and Ground Lift

Stereo Direct Box for Computer Sound Cards & A/V

Passive Direct Injection Box with Two Jensen Transformer-equipped Channels

Low-noise 1-in/3-out (2 Isolated, 1 Through) Passive Microphone Splitter with Jensen Transformer, Switchable Ground Lifts, and -30dB Switchable Pad on Input

3-channel Passive Line Splitter with Jensen Transformer and Input Pad