ART Studio & Recording

Reversible 16-point Patchbay with XLR Female and XLR Male Connectors

2-way Stereo Level Converter (Balanced to Unbalanced and Unbalanced to Balanced) with XLR, RCA, and 1/8" I/O

2-Channel Microphone/Instrument Preamp with Variable Valve Voicing, Variable Impedance, and Output Limiting

2-channel Passive Direct Box with Low Noise, Input Attenuation, and Phase Shift Switches

Power Sequencer with 8 Sequenced Rear-panel Outlets with Front-panel LED Indicators, 1 Front-panel Unswitched Outlet, EMI/RFI Filtering, Overload Protection, and Rear-mount Remote Control Terminal Block

8x2 Microphone Signal Splitter with Direct and Transformer-isolated outputs, Ground-lift switches, and Attenuation Pads on Each Channel

1U Rackmountable 8-channel Microphone/Line-level Splitter with 1 XLR Direct Output and 2 Transformer Balanced XLR Outputs

2-channel Power Amplifier, 130W RMS/ch at 4 ohms, with Silent, thermal-dependent cooling system, wide frequency response, binding-post outputs

8-channel Mic/Line Mixer with Individual Volume, Pan, and Phantom Power Controls, and Stereo Output

Preamp and DI Box with +48V Phantom Power, Variable Gain, Phase Reverse Switching, Variable Valve Voicing, and Output Protection Limiting

2-channel Mic Preamp with Tube/Solid-state Voicings, Vocal Enhance, Low Cut, Variable Impedance, +48V Phantom Power, and Instrument DI

2-channel Active Direct Box with Bluetooth Receiver, Headphones Output, and Transformer-isolated XLR Outputs

48-point Patchbay with 1/4" TRS Jacks and Normal/Half-normal Operation

2-channel Phantom Power Supply with XLR Inputs and XLR Outputs

8-point Desktop Patchbay

4-channel Passive Mixer with 4 Stereo 1/4" Input Channels and 1 Stereo 1/4" Output Channel with 90dB of Attenuation Per Channel

Dual 31-band Graphic EQ with Balanced and Unbalanced I/O

12-volt Power Adapter for ART Products

Mic Signal Splitter/Combiner with Phase Invert Switch, Direct Out and Isolated Out

2-channel Optical Compressor with Tube/Solid-state Voicings, Stereo-linkable Channels, 1.25:1 Ratio, and Per-channel Bypass

2-channel Phantom Power Supply with XLR Inputs, XLR Outputs, and 12 Volt 150mA AC Power Adapter

4-channel Power Amplifier, 100W RMS/ch at 8 ohms, with Flexible I/O, SmartFan Silent Cooling, Wide frequency response

2-channel Reamping Direct Box

Class A Tube Channel Strip with Dynamics and EQ Processing and Digital Connectivity

Bus-powered USB to XLR D/A Converter with Switchable Transformer-isolated Outputs and Headphone Output

High-quality Passive Direct Box with Low Noise, Input Attenuation, and Phase Shift Switches

1-in/2-out Mic Signal Splitter with Ground Lift, Input Pad, Direct XLR Out, and Transformer-isolated XLR Out

2-channel Power Amplifier, 200W RMS/ch at 8 ohms, with SmartFan Silent Cooling, Wide Frequency Response, Binding-post Outputs

Affordable 2-channel Active Direct Box with Attenuation and Ground Lift Onboard - Runs on Battery or Phantom Power

1-channel Tube Optical Compressor with Parallel Compression, Threshold and Ratio Controls, and Attack and Release Controls

9VAC 1000mA ART Power Supply

Mono Tube Channel Strip with Switchable Microphone Impedance, Selectable Opto/FET Compression Voicings, and 4-band Semi-parametric EQ

48-point Patchbay with 1/4" TRS Jacks and Normal/Half-normal Operation, (16) 1.5' TRS Patch Cables, and (8) 1' TRS Patch Cables

31-band 1/3 Octave Graphic EQ with Constant-Q Circuitry

Tube Preamp with Variable Impedance, FET Limiter, and USB

8-outlet Power Block with 2 USB Ports, EMI/RF Filtering, Overload Protection, and 20' Power Cord

4-channel Microphone, Instrument, and Line Mixer / Computer Interface with 2 XLR/1/4" Inputs, 2 1/4" TRS Inputs, and 1/8" Headset Mic Input

1-channel Channel Strip with Multi-voice Mic Preamp, Opto Compressor, and Tilt EQ

Multi-input A/V Direct Box with XLR Output

3-Channel Microphone Mixer with Phantom Power

Demo Studio Linear 100W Amplifier

1-channel Tube Microphone Preamplifier with 48V Phantom Power, Selectable Input Impedance, Tilt EQ, and Low-cut Filter