Nektar Panorama Motorized Fader Test
To test the motorized fader on your Nektar Panorama to verify functionality, follow the steps below:
- Turn off the Panorama.
- Plug both USB cables into the Panorama, then hold the “Internal” and “Play/F10” buttons while powering on the Panorama.
- Continue holding the “Internal” and “Play/F10” buttons until you see “PANORAMA Px IN TEST MODE” at the top of the display.
- Touch the motorized fader. You should see a red indicator in the lower left corner of the display that says “Touch On.”
- Let go of the motorized. The display should now say “Touch Off.”
- Move the motorized fader all the way to the top, then all the way to the bottom. You should see a fader graphic moving on the display as you move the fader.
- Now move the first black fader (just to the right of the motorized fader) all the way up and all the way down. The motorized fader should move along with the black fader.
If the touch sensor or the motorized fader do not respond as described above, there is likely a hardware malfunction with the Panorama. If this is the case, please contact our Tech Support team.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
