Radial Direct Boxes

Passive Stereo DI with Isolation Transformer, 15dB Pad, and Lift Switch

Passive Mono Direct Box with Custom Transformer and Rugged I-beam Construction

Passive 2-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors

Phantom-powered High-resolution Active Direct Box with -15dB Pad for Passive Guitars and Basses

Stereo USB Laptop DI Box with 24bit/96k Converters, 2 Balanced Outputs Balanced lo-Z Outputs with Switchable Isolation, and Built-in Headphone Amp

Passive Mono Direct Box with Jensen Transformer and Rugged I-beam Construction

Stereo Direct Box Optimized for Consumer Device Audio

Passive Re-amping Device with Custom Transformers

Active 48-volt Phantom-powered Direct Box

Transformer-equipped Passive Stereo DI

Active Direct Box for Bluetooth Wireless Audio Streaming with Mono Sum Switch, Ground Lift, Headphone Output, and Level Control

(2) Passive Mono Direct Boxes with Custom Transformer and Rugged I-beam Construction

Passive 1-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors

Passive Stereo DI with Isolation Transformer, 15dB Pad, Lift Switch, (2) XLR Cables, and (2) Instrument Cables

Passive Direct Box with Eclipse ET-DB3 Transformer, Stereo-to-mono Merge, and 15dB Pad

Active Stereo Re-amping Device with Variable Output and Stereo Effects Loop

Passive Re-amping Device, Variable Output, Custom Transformer, 3-way Filter Switch, Phase Inverter, and Ground Lift

Passive Mono Direct Box with Custom Transformer and Rugged I-beam Construction, XLR Cable, and Instrument Cable

Instrument Line Driver System with SGI-RX Receiver and SGI-TX Transmitter

Low-noise 1-in/3-out (1 Isolated and 2 Through) Passive Microphone Splitter with Eclipse ET-MS10 Transformer, Switchable Ground Lifts, and -30dB Switchable Pad on Input

Active 48-volt Phantom-powered Stereo Direct Box

XLR Line Isolator Designed to Handle Balanced and Unbalanced Audio Signals at Any Volume Level

Passive 8-channel DI with Custom Transformers

Direct Box with Optimized for Orchestral Instruments with Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter

(2) Passive Stereo DI Boxes with Isolation Transformer, 15dB Pad, and Lift Switch

Stereo Passive Line Isolator with 1:1 Transformers, Sum Switch, and Ground Lift

Signal Driver with Level Matching from -10dB to +4dB

2-channel Passive Stereo Line Isolator with Polarity Switch, Dual Ground-lift Switches, and -15dB Pad

2-channel Acoustic Preamp and DI with Phantom Power, 3 Band EQ, Switchable Filter, Piezo Boost, FX Loop, and Wet/Dry Blend

Active Re-amping Device with Class-A Signal Path, Variable Output, and Ground Loop Elimination

Active Direct Box, 48V Phantom Powered, with 800k-ohm Input Impedance, Polarity Switch, and 15dB Pad

2-channel Passive Stereo +4dB to -10dB Isolator and Converter with Ground Lift and Variable Output Level Control

1-channel Active Direct Box with HPF, Polarity Switch, and Add'l 1/4" Aux Output - For Piezo Pickups

2-channel Line-level Isolator for Balanced and Unbalanced Signals

1-in, 14-out Passive Line-level Splitter with Trim Pots and XLR Through for Daisy Chaining

Low-noise 1-in/2-out (1 Isolated, 1 Through) Passive Microphone Splitter with Jensen Transformer, Switchable Ground Lifts, and -30dB Switchable Pad on Input

Stereo Passive DI with Level Control, Mono Merge, and 1/4", RCA, and 1/8" TRS Input Connectors

Stereo Passive +4dB to -10dB Converter with Jensen Transformers

2-In, 7-Out Signal Routing System for Guitarists, with Class A Ciruitry and Balanced I/O

Passive Speaker Cabinet Merger for 2 Guitar Cabinets

2-Channel Manual Stereo Audio Switcher; Inputs: 2 x 1/8" and 4 x 1/4" TRS; Outputs: 2 x XLR, 2 x 1/4" TRS, 1/4" Headphone

(2) Passive Mono Direct Box with Custom Transformer and Rugged I-beam Construction, (2) XLR Cables, (2) and Instrument Cables