Radial Accessories

Passive Stereo DI with Isolation Transformer, 15dB Pad, and Lift Switch

Passive Mono Direct Box with Custom Transformer and Rugged I-beam Construction

9-outlet Power Conditioner with Noise Filtering, Surge Protection, and LED Illumination

11-outlet Power Supper Supply with Noise Filtering and Surge Protection

Passive 2-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors

Phantom-powered High-resolution Active Direct Box with -15dB Pad for Passive Guitars and Basses

Stereo USB Laptop DI Box with 24bit/96k Converters, 2 Balanced Outputs Balanced lo-Z Outputs with Switchable Isolation, and Built-in Headphone Amp

Passive Mono Direct Box with Jensen Transformer and Rugged I-beam Construction

Stereo Direct Box Optimized for Consumer Device Audio

Passive Re-amping Device with Custom Transformers

4-channel Cat 5/6 Analog Audio Snake Receiver

4-channel Cat 5/6 Analog Audio Snake Transmitter

Active 48-volt Phantom-powered Direct Box

Transformer-equipped Passive Stereo DI

Active Direct Box for Bluetooth Wireless Audio Streaming with Mono Sum Switch, Ground Lift, Headphone Output, and Level Control

3-channel Stereo Keyboard Mixer with 2x2 USB Interface, Effects Send/Receive, and Pedal Functionality

(2) Passive Mono Direct Boxes with Custom Transformer and Rugged I-beam Construction

Passive 1-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors

Passive Stereo DI with Isolation Transformer, 15dB Pad, Lift Switch, (2) XLR Cables, and (2) Instrument Cables

Passive Direct Box with Eclipse ET-DB3 Transformer, Stereo-to-mono Merge, and 15dB Pad

Active Stereo Re-amping Device with Variable Output and Stereo Effects Loop

Passive Re-amping Device, Variable Output, Custom Transformer, 3-way Filter Switch, Phase Inverter, and Ground Lift

Rackmount 12-channel Cat 5/6 Analog Audio Snake Receiver

Passive Mono Direct Box with Custom Transformer and Rugged I-beam Construction, XLR Cable, and Instrument Cable

4-channel Cat 5/6 Analog Audio Snake Receiver and 4-channel Cat 5/6 Analog Audio Snake Transmitter

Instrument Line Driver System with SGI-RX Receiver and SGI-TX Transmitter

Low-noise 1-in/3-out (1 Isolated and 2 Through) Passive Microphone Splitter with Eclipse ET-MS10 Transformer, Switchable Ground Lifts, and -30dB Switchable Pad on Input

Active 48-volt Phantom-powered Stereo Direct Box

XLR Line Isolator Designed to Handle Balanced and Unbalanced Audio Signals at Any Volume Level

(2) Passive Stereo DI Boxes with Isolation Transformer, 15dB Pad, and Lift Switch

Direct Box with Optimized for Orchestral Instruments with Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter

Passive 8-channel DI with Custom Transformers

Stereo Passive Line Isolator with 1:1 Transformers, Sum Switch, and Ground Lift

Signal Driver with Level Matching from -10dB to +4dB

2-channel Passive Stereo Line Isolator with Polarity Switch, Dual Ground-lift Switches, and -15dB Pad

15-volt Power Supply to Adapt 15V Radial Products

2-channel Acoustic Preamp and DI with Phantom Power, 3 Band EQ, Switchable Filter, Piezo Boost, FX Loop, and Wet/Dry Blend

Rackmount 12-channel Cat 5/6 Analog Audio Snake Transmitter

Rackmount Keyboard Mixing Station with 4 Stereo Analog Inputs, MIDI and USB Connectors, Stereo Aux Send/Receive, 2 Headphone Outputs, and Cue Switches

Active Direct Box, 48V Phantom Powered, with 800k-ohm Input Impedance, Polarity Switch, and 15dB Pad

Active Re-amping Device with Class-A Signal Path, Variable Output, and Ground Loop Elimination

2-channel Passive Stereo +4dB to -10dB Isolator and Converter with Ground Lift and Variable Output Level Control