Why doesn’t my insert cable work with my X32?
A TRS to Dual TS cable works as an insert on many analog mixers because they use a single TRS jack for output and input. However, the X32 uses independent output and input jacks.
To use your outboard effects with the X32:
- Connect a cable from an output on the X32 to the input of your effects processor
- Then, connect another cable from the output of the effect to an input on the X32 as shown in the picture below.
Note: In this picture, we’re using the Aux in/out but you could also use the XLR outs on the X32.
Helpful Links
Behringer X32: How to get audio to the main outs
Behringer X32: How to assign channels to a DCA
How do I restore my Behringer X32 to factory settings?
Getting to know your Behringer X32
How do I connect two Behringer S16s to an X32?
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
