Behringer X32: How to assign channels to a DCA
Behringer’s X32 provides countless features to make mixing and recording a breeze. In this article, we will be showing you how to assign channels to a DCA. Take a look at the instructions and video below as well as the Additional Tips and Resources section for more information.
How to Assign Channels to a DCA
Assigning channels to a DCA is a very easy process! While holding the DCA channel’s Select button, just press each input channel’s Select button to assign them. Take a look at the instructions and video below.
- Press DCA Group 1-8.
- Hold Select for the DCA channel you wish to use.
- Tap the Select button for all input channels you want to be assigned to the DCA.
- Release the Select button for the DCA.
You can view the assigned channels in a DCA group by holding the DCA Select button. The Select button will turn green for all assigned channels. If you want to unassign channels from a DCA group, follow the same process as above. The Select buttons will turn off when they are unassigned. For more information about DCA, read What is a DCA and When Should I Use One?
Related Content
- Behringer X32: What is a DCA and when should I use one?
- Behringer X32: How to assign channels to a Mute Group
- How do I set up X32 Edit with my Behringer X32?
- Behringer X32: S16 setup
- How to update the firmware on the Behringer X32
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
