My Neo Instruments Mini Vent is distorting.
The mini Vent is set to Hi Gain input from the factory to get the most out of the DRIVE section when used with low to medium output instruments. If an instrument with hotter output signal is connected (e.g. Humbucker guitars and some organs) and you notice clipping, the mini Vent can be switched to Lo Gain.
1. Unplug the AC adapter of the mini Vent
2. Unscrew the 4 screws on the bottom and open the enclosure
3. Find the jumper soldered flat on the PCB board (see picture below) 4. Remove the jumper and attach on one of the pins only
5. Attach the bottom cover with the 4 screws
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
