Hidden ADAT Test Functions

SET LOC / EJECT Master Eject Will eject all slaves

SET LOC/ REC Cross Fade Select Selects cross fade of 10.67ms, 21.33ms, 32.00ms or 42.67ms

SET LOC/ PLAY Device ID Shows unit ID

SET LOC/ STOP Drum Time Shows the tape to head contact hours

SET LOC/ FF Software Version Displays software version

SET LOC/ RW Brake Activate To used only with no tape loaded, used for brake service only

SET LOC/ AUTO IN Monitor Selection Toggles between IN and TAPE monitor while recording

SET LOC/ ALL IN Audio path select Toggles between path from I/O or through the DAC

SET LOC/ AUTO 2>1 Infinite Loop Sets up an infinite test loop between Locate 1 and Locate 2

SET LOC/ AUTOPLAY Loop Display Shows the number of completed passes while in Infinite loop mode

SET LOC/ FORMAT Tape Length Toggles between t160 (T-160) and “Std1” (T-60 and T120 tapes

SET LOC/ DIGITAL IN Master Clock Toggles internal 48khz clock on and off (internal or external clock)

SET LOC/ PITCH UP MAX pitch Immediately increases speed to max

SET LOC/ PITCH DOWN Pitch Reset Immediately resets pitch to 000

SET LOC/ REC 1 Record Tab Status Shows whether the tape’s write inhibit tab is in place

RECORD/ PLAY while turning on power User Reset Clears and reinitializes memory

Knowledge Base