Transferring Data via MIDI Bulk Dumps between Two 02R Mixers

It is possible to transfer Scene Memories, Automix Memories, Program Change Assign tables, and System Setup, as well as Effects, Dynamics, EQ, and Channel Library programs between two 02R mixers via MIDI Bulk Dumps.

Preparing MIDI Transmission between Two 02R Mixers:

1) Connect the ‘MIDI OUT’ of the 02R mixer that will be transmitting the data to the ‘MIDI IN’ of the 02R mixer that will be receiving the data, using a standard MIDI cable.
2) Select the desired channel for the MIDI data transfer on the transmitting 02R mixer.
a) Press the [MIDI] button in the ‘DISPLAY ACCESS’ group on the transmitting 02R mixer. The ‘MIDI Setup’ page will be displayed on the LCD.
b) Use the Encoder Wheel to select the desired channel from the ‘Transmit Channel’ section of the ‘MIDI Setup’ page.
c) Press the [ENTER] button.
3) Select the same channel on the receiving 02R mixer as was set for the transmitting 02R mixer.
a) Press the [MIDI] button on the 02R mixer to open the ‘MIDI Setup’ menu page.
b) Use the Encoder Wheel to select the desired channel from the ‘Receive Channel’ section of the ‘MIDI Setup’ page.
c) Press the [ENTER] button.

MIDI Bulk Dump Procedure:
NOTE: This procedure must be performed on the transmitting 02R mixer.
1) Press the [MIDI] button repeatedly to access the ‘MIDI Bulk Dump & Request’ menu page.
2) Press the , , , or ‘CURSOR’ buttons to select the ‘TYPE’ of Bulk Dump to be performed. Click here to view the list of ‘TYPES’.
NOTE: Only one type of Bulk Dump can be transmitted at a time.
3) Press [ENTER] button. The selected ‘TYPE’ will be highlighted onscreen.
4) Select one of the following Bulk Dump options:
a) Bulk Dump a single Program or Memory location of the selected ‘TYPE’.
1] Turn the Encoder Wheel to select the ‘NUMBER’ of the Program or Memory location to be dumped.
NOTE: The number of the Program or Memory location selected for the Bulk Dump can be selected for all the data types except System Setup and Program Change Assign Table data.
2] Press the , , , or ‘CURSOR’ buttons to select ‘BULK DUMP’.
3] Proceed to step 5.
or,
b) Bulk Dump ALL Programs or Memory locations of the selected ‘TYPE’.
1] Press the , , , or ‘CURSOR’ buttons to select ‘DUMP ALL’.
2] Proceed to step 5.

5) Press the [ENTER] button to execute the Bulk Dump command.
NOTE: All bulk dumps are transmitted directly between the same memory locations. For example, when the ‘TYPE’ selected is ‘SCENE MEM’ and the ‘NUMBER’ is ‘2’ (Scene Memory 2) and a Bulk Dump is executed on the transmitting 02R mixer, it will be sent to Scene Memory 2 on the receiving 02R mixer. It is not possible to transmit a Bulk Dump to a memory number other than the one in which it is stored.

Reference: Owner’s Manual, p. 145-146

Knowledge Base