I can’t get my CDROM to show up in disk mode.
There a few key things that need to be in place before using your CDrom with your Kurzweil –
1) make sure that the terminator switch is set to disable.. (if you do not have a hard drive in the machine
2) make sure you DO have a terminator on the CDrom itself
3) connect the CDrom to the SCSI port…(not the SCSI thru)
4) set the SCSI ID of the drive to 3,4, or 5…
(never 6 because that is the internal memory of the machine and try to stay away from 0,1 and 2 because those are usually numnbers saved for a hard drive
5) Most times you will need to turn the CDROM on 1st, then the keyboard so that the keyboard can recoqnize all perhiphals on the SCSI chain… NOTE: in some older models, it is suggested to turn on both items at the same time)
6) hit the disk button and dial to your number…
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
