Q: “Are the meters on the MRS-1266CD pre or post?”
A: Zoom’s MRS-1266CD multi-track workstation can indicate levels both pre or post fader, depending on the settings (the level meter is just below the display). You can choose which you want to view by changing the settings as follows:
1. From the main screen, press the [UTILITY/TRACK EDIT] key in the display section.
2. Use the cursor left/right keys to bring up the indication “UTILITY SYSTEM” on the display, and press the [ENTER] key.
3. Use the cursor left/right keys to bring up the indication “UTILITY LVL MET” on the display, and press the [ENTER] key.
4. Here you will see one of the following:
a. LVL MET
POST (or)
b. LVL MET
PRE
5. “POST” means that the meters show the level of the signal after passing through the level controls/faders (default setting).
6. “PRE” means that the meters show the level of the signal before passing through the level controls/faders.
7. Turn the dial to change the setting to PRE or POST.
8. Return to the main screen by pressing the [EXIT] key several times. You’re done!
