MotorMix Archives | Sweetwater

¡Obtenga asesoría en español! Llámenos hoy a (800) 222-4701

Sweetwater Gear Exchange Integration Studios

Content Creators Home Audio House of Worship Immersive

Articles Tagged "MotorMix"

1

After updating ProTools 6 to 6.7 (on Mac OSX), I can’t choose the HUI in Perihperals > Midi controllers. When I do, ProTools unexpectedly quits.

Updated on Apr 27, 2007 at 12:00 AM

2

How do I setup the MOTORMIX as a control surface in LOGIC 6.0?

Updated on Apr 27, 2007 at 12:00 AM

3

I pulled the application Digital Performer out of the Digital Performer folder. Now I my control surface won’t work, the Control Surface Setup window is all garbled, and I can’t push any buttons.

Updated on Apr 27, 2007 at 12:00 AM

4

How do I perform a self-test on my CM Automation MotorMix?

Updated on Apr 27, 2007 at 12:00 AM

5

There does not seem to be communication between my Motor Mix and Pro Tools. Motor Mix LCD reads “Motor Mix ™ is ready for a session”, though a Pro Tools session has already been launched.

Updated on Apr 27, 2007 at 12:00 AM

6

Cannot instantiate a plug-in beyond the eighth fader when using multiple motor mix units.

Updated on Apr 27, 2007 at 12:00 AM

7

How is “Fader Punch Mode” on the Motor Mix different than standard Pro Tools mode? It seems that I can perform the same automation functions in either.

Updated on Apr 27, 2007 at 12:00 AM

8

Where is the Record button on my Motor Mix?

Updated on Apr 27, 2007 at 12:00 AM

9

When I try to locate to a memory location using Motor Mix in Transport Mode, Pro Tools does not respond. Other communication functions seem normal.

Updated on Apr 27, 2007 at 12:00 AM

10

I cannot control any Orange Vocoder parameters with my MIDI or Ethernet controller.

Updated on Apr 27, 2007 at 12:00 AM

11

Where is the Record button on my Motor Mix?

Updated on Apr 27, 2007 at 12:00 AM

12

When I try to locate to a memory location using Motor Mix in Transport Mode, Pro Tools does not respond. Other communication functions seem normal.

Updated on Apr 27, 2007 at 12:00 AM

13

My Motor Mix is not communicating with Pro Tools; Motor Mix responds to movement of the Pro Tools faders, but Pro Tools faders will not respond to movements of Motor Mix faders. A communication error message keeps appearing in Pro Tools.

Updated on Apr 27, 2007 at 12:00 AM

14

Digital Performers “Control Surface Setup” does not show “HUI” as a Hardware option Problems getting Digital Performer to recognize the HUI or the Motormix (using the HUI driver)

Updated on Apr 27, 2007 at 12:00 AM

15

QuickStart on setting up a Motormix with a ProTools System .

Updated on Apr 27, 2007 at 12:00 AM