How to set up the MTPAVUSB to work in a STAND ALONE mode:
Step 1: Launch your CLOCKWORKS program that comes with your MTPAV
Step 2: go to the windows Menu Option and choose SETUPS AND MODIFIERS… this will bring up all of the BASE SETUPS that the MTPAV can hold in it’s memory bamks
Step 3: Chose one of the BANK SET UP’s by highlighting it..
Step 4: Once chosen, the DEVICE setting and ROUTING box opens .. showing you, your virtual studio and all of it’s cables
Step 5: Determine which INport is going to be the port for your MIDIcontroller.
Step 6: simply click over the port and hold as you drag across the screen to the opposite side where your outputs are located. Repeat this process for as many outputs as you will need from this controller
Step 7: Once this is done, save this information and shut the computer down and your MTPAV should be ready to go…
Step 8: When you shut the computer down, the MTPAV will be in STAND ALONE mode and you can choose your SETUP that you have created by turning the VALUE button on the face of your MTPAV
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
