How do I route the internal effects to an option slot on my O1V?

Internal Effects on the 01V can only be routed to the option slot via the busses and cannot be routed to the option slot via the Direct Outs.

1) Press the [OPTION I/O] button to locate ‘Option page 4’. The screen should display ‘Option Out Select’.

2) Press the or cursor buttons to select the appropriate Bus as the routing option for the desired destination track.

3) Press the [ENTER] button.

4) Press the [PAN/ROUTING] button to locate ‘Pan/Route page 2’.

5) Press the [SELECT] button for either ‘Return 1’ or ‘Return 2’, depending on the desired effect to be sent to the Option Slot.

6) Press the or to select the desired Bus to which the effect will be routed.

7) Press the [ENTER] button.
NOTE: The numbers 1-4 correspond to busses 1-4.

Reference: Owners p.49, 219

Knowledge Base