How do I configure the omni outs for direct outs on my O1V?
The Omni Outputs on the back of the 01V can be used as Direct Outputs (Channels 1 – 16) as well as for Aux, Bus, and additional Stereo Outputs.
NOTE: If the Omni Outputs are used as Direct Outputs, they are Post-Fader.
1) Press the [PAN/ROUTING] button to locate the ‘PAN/ROUTE’ page ‘4’.
NOTE: The ‘PAN/ROUTE’ page number will be located on a tab in the upper left corner of the display.
2) Use the , , , or ‘CURSOR’ buttons to select the ‘OMNI 1’ parameter box in the ‘OMNI OUT SELECT’ section.
3) Turn the ‘PARAMETER’ wheel to select the desired source for the Omni Out.
NOTE: The sources listed are for Channels 1-16 (CH1-CH16), Aux (AUX1-AUX4), Bus (BUS1-BUS4), and Stereo (STOUT R, STOUT L ).
4) Press the [ENTER] button.
5) Repeat steps 2 – 4 for the remaining three Omni Outputs as desired.
Reference: Owners Manual, p. 116
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
