Roland CD-2 Applying Effects to Inputs
You can apply two separate effects to the individual inputs of the CD-2. For example if you have two separate inputs such as a guitar in channel 1 and vocal in channel 2, you can call up a patch designed to apply effects unique to each of those inputs:
-First you must set the Ext MIC1/2 Pan to L/R:
1. Press MENU several times until “EXT MIC1/2 PAN” appears in the display.
2. Press ENTER.
3. Turn the DATA wheel until “L/R” appears in the display.
4. Press EXIT.
5. Press EXIT again.
-Now you can apply the effects:
1. Press the EFFECT button several times until you get to the “GTR:” category.
2. Use the DATA wheel to scroll through the patches.
Note: The patches that apply two separate effects have a “+” in them; i.e. “JC-120 + COMP” applies the JC-120 sound to a guitar plugged into the GTR jack, and a compressor to a microphone plugged into MIC 2.
3. Once you select the patch you want, press EXIT.
You can now begin your recording and the effects will be applied!
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
