Recording a KARMA Combination to the Sequencer

1. Select and audition Combination E025 Gig Split. This Combi contains four active KARMA GE’s (Module D is
controlled by Dynamic MIDI), ready to be quickly copied and recorded, along with KARMA Realtime controls, to the
KARMA sequencer.
2. Press the SEQ key, and then enter 10 (an empty song location) on the keypad. A popup menu will appear: “Create
new song…” Ç Press [F8] to confirm OK. (If no factory demos are loaded, you do not have to select a new song in
this way)
3. Press [F8] (UTILITY)
4. Cursor to “Copy From Combi”, and then press [F8] again.
5. Enter E025 with the BANK key and keypad, and then Cursor to highlight “with Effects” Ç Rotate the DIAL to check the box Ç Press [F8] to confirm OK.
6. Press [F6] (Pref.) and Cursor to highlight “Multi REC” Ç Rotate the DIAL to check the box.
7. Press [F7] (K.RTC tab) so that the KARMA Realtime controls are shown in the display.
8. Press the REC/WRITE key, and then press the START/STOP key. During the precount after pressing START/STOP, make sure to press and hold one of the CHORD TRIGGERS, or play a chord on the keyboard, so that the beginning of recording is in sync with the KARMA patterns to be generated! Don’t worry if you can’t hear the pattern start at this point; it will start, in sync, as soon as recording begins.
9. As you are recording and playing the keyboard or CHORD TRIGGERS, work with the KARMA Realtime Controls in
the same way as you would when playing a Combination. Change Scenes, press Switch 1 and 2, and make changes
any of the eight knobs. Everything you do will be recorded to the sequencer.
10. When you are finished, press START/STOP, and then press START/STOP again, to playback your sequence.

Knowledge Base