Copying KARMA modules and Control settings in Program mode:
1. Select Program A006 Nasty Bass using the keypad, and then play some low notes to hear this bass GE. Be sure to
try the two Scenes and the KARMA Realtime Controls.
2. Turn OFF the KARMA function and press [F4] (KARMA tab).
3. Press the MENU key, and then press [F6] to highlight “KARM” Ç Press [F8] (Open), and then press [F8] (UTILITY)
once again Ç Cursor to highlight “Copy KARMA Module”, and then press [F8] to confirm OK.
4. Cursor to highlight the top line, and make sure that the display indicates “From: Program”.
5. Cursor 1x and highlight the Program name field, and using the keypad, press 38, then press ENTER to select
Program A038: Mega Bass as the copy source Program.
6. Cursor 1x and highlight “KARMA RT&Panel Settings”, and then rotate the DIAL to check the “box”.
7. Press [F8] to confirm OK. The source GE and associated parameters / Realtime Controls are now copied to Program
A006. The synth parameters remain as they were originally; only the KARMA parameters have been copied.
Note: As you learn more about KARMA, you’ll find many sounds and KARMA setups that can be “interchanged” in this way, with
some new and unique results.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
