PreSonus SLCS18AI – connecting with a computer running Studio One

Your CS18AI can be used to control the transport, markers, automation, and mix of your Studio One DAW software. Please note that if you do not use an AVB-compatible switch and computer, you will only have control between the CS18AI and Studio One. You will not have audio between the two since this requires an AVB network.

To connect the CS18AI to Studio One:

1. Connect your CS18AI directly to your computer or via a switch on the same network. It is possible to have control over Studio One via a wireless connection.
2. Power on the CS18AI and launch Studio One.
3. On the CS18AI, press the UCNET button in the Master Control section.
4. On the UCNET screen, you’ll see a drop down list for connected mixers and software.
5. Touch the software drop down and then touch the Studio One or Capture instance on the list to select it.
6. You are now connected with Studio One for control from your CS18AI.

Knowledge Base