I do not have an option for ADAT on my Digidesign DIGI 002 or 002 Rack. In the Hardware Setups window the Optical port says it’s off. It says: RCA = S/PDIF, Optical = Off. Why has that happened?
In Pro Tools LE with the Digi 002 or Digi 002 Rack, if you are looking in the Hardware Setups window (Setups menu > Hardware Setups) and it says RCA = S/PDIF, Optical = Off. That’s because the sample rate of your Pro Tools session is at 96k. The Optical standard doesn’t go to 96k, only to 44.1k or 48k. Therefore, you must have a Pro Tools session with a sample rate of 44.1k or 48k.
Launch a new Pro Tools session at 44.1k or 48k, then go back to the Hardware Setups window (Setups menu > Hardware Setups), now you can choose RCA = S/PDIF, Optical = ADAT.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
