Installing an Operating System or Setups
This procedure is for installing OS and setup files. See Installing a New Boot Block on page A-4 if you want to install a new boot block.
1. Select Install engine by pressing the Enter button.
2. Select via MIDI by pressing the Enter button.
3. Start playing the MIDI file from the sequencer. While loading, the bottom line of the PC2’s display will show a message segment X of YÓ where X starts at 1 and increments with each segment up to Y segments. If the display continues to show “waiting for MIDI” after starting the sequencer, stop and restart the sequence.
4. Depending on the size of the file, it may take up to 17 minutes to completely load at which point the bottom line of the display will show done . Then, if you have another file to load, open that file from the sequencer and start playing it.
5. After you have completed loading all of the MIDI files (except a boot block file), press the Cancel button twice to get back to the main boot block menu, scroll to the Hard RESET menu item, and select it by pressing Enter. Before doing a hard reset, please read Resetting the PC2 on page A-5, so you can avoid losing any of your PC2 programs or setups.
6. Press Yes to execute a hard reset; the PC2 will restart with the new operating system and/or setups.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
