Installing a New Boot Block

If the file you are loading is a boot block file with the letter b as the fourth letter in the filename,
follow instructions in Setting Up For a Software Upgrade on page A-4, then continue:
1. Scroll to Update boot block and select by pressing Enter.
2. Select via MIDI by pressing Enter.
3. Start playing the MIDI file from the sequencer. While loading, the bottom line of the PC2’s
display will show a message “segment 1 of 1” If the display continues to show “waiting
for MIDI” after starting the sequencer, stop and restart the sequence.
4. After about a minute, the PC2 will reset and start running normally.

Knowledge Base