“Error receiving clock from TDM bus or peripheral” in Digitest.
– Power cycle the system.- Verify that the card order is correct (Disk I/O, Farm, SCII).- Check if the peripheral cable is connected to the Disk I/O.- Check that the TDM ribbon cable is connected/seated properly.- Remove the DigiSetup file from the System Folder and restart. (DigiTest is relying on the DigiSystem INIT to setup the TDM master bit.)- Interface cable plugged in upside down on d24, Disk I/O, or DSP Farm card.- One user reported that switching his 888 back to Internal Sync (he was using a MicroLynx) fixed this.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
