Common error messages on Tascam DTRS machines
“E CLOC” or “ECLOC” : No clock is coming in from source
– When referencing external BNC word clock, check word clock cable and the word clock source. Make sure sample rates match.
– When slaved to another DTRS, check the PW88s sync cable and/or try another cable. Also make sure the master machine is not showing an ECLOC message.
“E t. cut” or “Etcut” : the tape inside the unit is broken.
“E. dio” or “Edio” : not getting TDIF input. Check PW88 inputs and make sure source is sending TDIF out.
“EdE” or “E. dEu” : Condensation has occurred on the head drum. Leave the unit on for 1-2 hours. The naturally occurring heat produced inside the unit will promote drying.
“E Hi-8t” or “EHI-8” : A tape that is not Hi-8 is loaded in the machine. Use only Hi-8 tapes.
“Ethint” : tape is too thin for the machine (less than 8.5 #μm) is loaded. Use 120 minute or shorter tapes.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
