Sounds Just As Good As It Looks!
Behind the eye-catching design of the Reveal Active's blue front panel lies a sound that's just as compelling. The sleek, curved face of Tannoy's Reveal Active was constructed to reduce diffraction, and its 40mm thick panel is strong enough to provide a firm mounting platform for the drive units. At a price that puts them well within the realm of possibility for even the most budget-conscious studio, the Reveal Actives are monitors you literally can't afford to miss! Tannoy Reveal Active at a Glance:
- Fashion and function in one ingeniously designed box.
- Use your Reveal Actives with Passives without any problems.
Form Meets Fashion The distinctive front panel of the Tannoy Reveal is not just for show; the curved baffle has been precisely designed to reduce diffraction and at 40mm thick is massive enough to provide the most rigid mounting platform for the drive units. A 1-inch soft dome tweeter is matched with a 6.5-inch longthrow bass unit by a low-loss crossover. Both drivers are magnetically shielded, allowing operation close to video monitors. The sound quality of the Reveal is relied upon daily by many thousands of engineers worldwide, and it is now firmly established as an industry standard for cost-effective nearfield monitoring. Crystal Clear Crossover Two 50W amplifiers and an electronic crossover directly coupled to the drive units provide ideal driving of the Reveal and Tannoy has been careful to avoid major changes to the critical balance and sound of the passive version. This allows you to move recorded material between rooms and locations using passive and active Reveals - and rely equally on both. Tannoy Reveal Active Features:
- Frequency Response: 65 Hz - 20 kHz
- Power Handling RMS/Program 50W/100W
- Sensitivity anechoic/half space 83dB/93dB
- Nominal Impedance 6 ohm
- Dispersion 90 degrees
- Features the Neutrik XLR/TRS combi input
Distinctive playback monitor providing sonic excellence at a budget price level.
