A Next Generation Monitoring Experience from JBL
For music production, post and broadcast, JBL 705P active studio monitors make it easier to achieve a superior monitoring experience in your studio. Thanks to JBL's acclaimed Image Control Waveguide (found on their flagship M2 reference monitor), 705P monitors project an amazingly large "sweet spot" for sonic accuracy throughout your mixing space. The soundstage is deep and wide, with ample output that competes with much larger speakers. With built-in DSP for advanced equalization and delay options, and your choice of analog or digital input, the JBL 705P is an outstanding solution for nearfield and midfield monitoring.
Related Videos: 705P 7 Series 5 inch Powered Studio Monitor
Greater dynamic range through next-gen driver technology
JBL's bi-amplified 705P studio monitor employs two custom drivers, the 2409H high-frequency compression driver, and the 725G low-frequency driver. Each was designed specifically by JBL for optimal dynamic range and low distortion in their relative frequency ranges. Between them, you'll hear remarkably linear output from below 39Hz all the way up. Another benefit of these drivers is their impressive volume handling: JBL reports the 705P offers two to three times the output of comparable studio monitors.
Powerful bi-amplification system
To get the best results from their custom drivers, JBL designed a powerful Class D amplification system for the 705P studio monitor. A 250-watt amp powers the 2409H high-frequency transducer, while an additional 250-watt amp drives the 725G low-frequency transducer. This system allows the 705P to deliver much more output than similar-sized speakers, allowing you to place it at greater distances in post production or mastering environments.
Innovative waveguide creates a large sonic sweet spot
If the 705P's design looks familiar, it's because it's equipped with the same waveguide as their flagship M2 reference monitoring system. Designed for sonic accuracy and neutrality, this waveguide also allows for a better sonic transition between the high- and low-frequency drivers. Said another way, you won't hear a noticeable dip in the crossover frequency range like you do with many two-way monitors. The waveguide also creates an exceptionally large sonic sweet spot, allowing for accurate monitoring throughout more of your control room. We've heard a lot of studio monitors at Sweetwater, and we're extremely impressed with the sound of the JBL 705P.
Combat acoustics and sync to video with DSP-based EQ and delay
In an acoustically perfect room, JBL's 705P monitor sounds remarkably neutral. For the real world, however, the 705P is equipped with DSP-based EQ to compensate for room acoustics. Fine tune your sound with the 12-band Room EQ, or use the 8-band User EQ for a customized response curve — perfect for compensating for screen loss when placed behind a perforated cinema screen. In larger spaces you can use digital delay to align speakers relative to your listening position. Additional AV Synchronization delay is ready to compensate for high-latency video displays.
JBL 705P Active Studio Monitor Features:
- Active 2-way reference monitor with 250W/250W Class D bi-amplification
- Image Control Waveguide creates an exceptionally large sonic sweet spot
- Neutral sound with wide-ranging response, from below 39Hz to above 36kHz
- Wide dynamic range, with 2–3 times the output of similar-sized monitor speakers
- Compensate for room acoustics and video latency with DSP-based EQ and digital delay
- Can be combined with JBL M2 Master Reference Monitors in a multi-channel system
- Harmon HiQnet port for future updates and digital networking
- Analog and digital inputs, with support for up to 192kHz
- Rugged construction with birch cabinet and steel grille
