Redundant Power Supply for Your dLive System
Although Allen & Heath dLive MixRacks already ship with a power supply, Sweetwater recommends adding a second MPS16 power supply for redundancy. That way, if one of your MixRack's power supplies fail, you can switch to the second supply with no interruption to your audio. To remove or replace, you simply remove the 4 screws securing the blank panel using a star Torx T8 screwdriver, slide the MPS16 into the slot, and tighten the 4 screws. And because the MPS16 is hot-swappable, you can switch it out without giving your event an unwanted intermission. With the Allen & Heath dLive MPS16 power supply, you can enjoy worry-free use of your dLive digital mixing system.
Related Videos: dLive MPS-16 Hot Swap Power Supply
Allen & Heath dLive MPS16 Power Supply Features at a Glance:- A redundant, hot-swappable power supply for dLive MixRacks
- MixRack automatically switches to the second power supply if the first one fails
- Features mains IEC socket and an On/Off rocker switch
- Slides in and out by loosening 4 screws for quick and easy swapping
- Includes a plastic P-clip cable clamp to secure the mains cable
