A 2-channel Rendering of a Famed Gibson Classic
A 2-channel rendering of an all-time Gibson tube combo classic, the Dual Falcon 20 blends the best of the old and new with a little help from Randall Smith and the brilliant engineers at Mesa/Boogie, who proudly hand-wire every model in sunny Petaluma, California. This 15-watt, 2 x 10-inch combo amplifier houses two footswitchable Falcon 20 preamps for rock-solid, 2-channel operation, along with an old-school Class A push-pull design and a cathode-biased power section to preserve the gritty magic of the original Falcon. Plus, the Dual Falcon 20's 3-position power-scaling and enhanced tone-shaping controls prove this bird has more than a few modernized tricks under its wings! You also get a per-channel tube-powered spring reverb and an ear-grabbing tremolo section. All wrapped up in a glorious period-inspired cab, the Gibson Dual Falcon 20 amplifier nails one of the most challenging feats in the 6-string realm — improving upon a time-honored classic while perfectly preserving the magic of the original.
Related Videos: Dual Falcon 20 15-watt 2x10-inch Tube Combo Amplifier
New feathers for an old Falcon
Envisaged by legendary amplifier guru Randall Smith and the Mesa/Boogie design team, Gibson's new flock of Falcons take a few choice detours under the hood to better meet the needs of modern guitarists. Vintage amp-obsessed guitarists have nothing to fear — this Falcon's Class A push-pull design and cathode-biased operation fall well within the confines of Gibson's historic amplifier designs. That said, this forward-thinking combo amplifier houses two footswitchable Falcon 20 preamps for flexible 2-channel operation. Moreover, instead of the original GA-19RVT's somewhat unusual tube configuration, this Falcon comes equipped with a quartet of 12AX7 preamp tubes and dual 6L6 power tubes. The result? A warm, chewy, and full-bodied punch of vintage-inspired tone arguably improves upon the original — no unobtainable and out-of-production tubes required.
Tube-driven tremolo and reverb
Another famous amplifier manufacturer may get all the glory when it comes to the splashy legacy of spring reverb. However, we'll let you in on a little-known fact: Gibson's original GA-19RVT Falcon was one of the first amplifiers to brandish built-in reverb years before the competition in 1961. Naturally, Gibson's modern Falcon 20 mirrors the original, with a lush-sounding spring reverb circuit and a deep, swampy tremolo, each with dedicated footswitch functions. And yes, much to the pleasure of Sweetwater's vintage-obsessed guitarists, the reverb and tremolo sections are true tube-driven circuits!
3-position power-scaling section
Much more than a strict reissue of the original Falcon, the Gibson Dual Falcon 20 boasts a superb set of modern upgrades that bolster its utility without betraying its old-school spirit. Chief among them is an all-new power-scaling section with three positions: Full (15 watts), Half (6 watts), and Low (2 watts). This Falcon's Class A power section of two 6L6 tubes dishes out a surprisingly robust roar before encountering saturation, making the 6-watt and 2-watt settings must-haves for guitarists seeking sweet-sounding preamp grit and growling power amp overdrive at non-ear-shattering volumes.
Gibson Dual Falcon 20 15-watt 2 x 10-inch Tube Combo Amplifier Features:
- A 2-channel reimagining of Gibson's venerable Falcon amplifiers of the 1960s
- Designed by Randall Smith and the Mesa/Boogie design team to modernize the Falcon series while preserving the tone and spirit of the original
- No-nonsense Class A push-pull single-channel design, punching out 15 watts through 2 top-quality 10-inch Jensen Blackbird Alnico speakers
- Dual 6L6 power tubes and a quartet of 12AX7 preamp tubes dish out everything from harmonic-rich cleans to searing tube-style saturation
- Lush tube-driven reverb and swampy tube-driven tremolo, both with dedicated footswitch controls
- 3 different power-scaling options to accommodate any playing situation: Full power (15 watts), Half power (6 watts), and Low power (2 watts)
- Straightforward control section consists of per-channel Volume, Tone, Frequency, and Reverb controls, in addition to your Tremolo knob
- Convenient Monitor DI output
- Handsome old-school aesthetics that replicate the timeless style of Gibson's late-1950s/early-1960s amplifier models
- Proudly built and handwired in Petaluma, Calif.
