1U USB/MIDI Interface for Eurorack
Control your Eurorack modular synth rig from your DAW, smartphone, tablet, or hardware MIDI device with the Intellijel MIDI 1U Eurorack module. Just install it in your Eurorack case (requires 1U-compatible case), connect a DIN-MIDI cable to your case’s rear-panel MIDI input, and you’re ready to go. If your case doesn’t have MIDI I/O ports, you’ll also need the uMIDI Jacks 1U module for MIDI input. In its default setting, the Intellijel MIDI 1U extracts MIDI data from a controller for Pitch, Velocity, Mod, CC, Gate, Trigger, Clock, and Reset. However, you can alternately configure the CC and Mod jacks to respond to channel aftertouch or high-resolution MIDI, fostering smoother, more analog-style operation from digital sources. Synthesists at Sweetwater appreciate the module’s ability to learn a MIDI channel for instant control from any device. With a powerful processor, 16-bit DAC, and the ability to connect with up to four Intellijel 1U MIDI expander modules, the Intellijel MIDI 1U is a highly useful USB/MIDI control interface for your Eurorack modular synthesizer.
Related Videos: MIDI 1U MIDI Voice/Clock/Sync Interface 1U Eurorack Module
Intellijel MIDI 1U MIDI Voice/Clock/Sync Interface 1U Eurorack Module Features:
- USB-MIDI and DIN-MIDI interface module for Eurorack modular synthesizers
- Requires 1U-compatible Eurorack case/power supply
- If your Eurorack case does not have MIDI I/O ports, you will also need the uMIDI Jacks 1U module for connectivity
- Clock output with divider
- 14-bit DAC and powerful processor delivers top-notch low-latency performance
- Reset jack can be configured to send Run messages for syncing your Eurorack modules with your DAW or hardware sequencer
- Gate and Trigger outputs for triggering envelopes, CC and Mod wheel outputs for modulation
- Firmware is updatable via USB
- Power Usage: 34mA (+12V) / 2mA (-12V)
- Module Width: 14HP
- Module Depth: 14mm
