Is there a way to restore the factory settings on the Korg TR?

The factory settings are referred to as the “preloaded
data.” The action of restoring the programs, combinations,
and global settings of the TR to their factory settings
is referred to as “loading the preloaded data.”
This operation will rewrite any data that had been
previously written. If you do not want to lose the
previously-written data, you must first save it to
SD card or external SCSI media (requires the EXBSMPL
option) ( p.46).
1 Press the [GLOBAL] key to enter Global mode.
(The key will light.)
2 Press the [EXIT] key.
You will be in the Global mode 1.1: System page.
3 Press the [F8] (“UTILITY”) key to access the Utility
menu.
4 Press the [F7] (” “) key to select “Load Preload/
Demo Data,” and press the [F8] (“OK”) key.
A dialog box will appear.
5 Use the [INC]/[DEC] keys to select the data that
you want to load.
Use “Kind” to select the data that you want to load.
For this example, select All Preload PCG.
.PCG files contain program, combination, drum kit,
arpeggio pattern, and global setting data.
6 Press the [F8] (“OK”) key.
A dialog box will ask you for confirmation.
7 Once again press the [F8] (“OK”) key.
All the preloaded data will be loaded.
If the Memory Protected dialog box appears, uncheck
the memory protect setting, and perform the
load operation once again ( p.43).

Knowledge Base