Starting the S-760 (from a System Floppy Disk)

1. Insert the S-760 System Disk in the floppy drive and start the S-760 by pushing the power switch.
2. The S-760 will start-up first by displaying its name and going through its initialization.
3. The LCD will then say “System Loading” and count-down, then check its wave memory and do a SCSI scan.
4. After completing this operation, the S-760 will come-up on the Performance Play 1 page.
Without a system disk, the S-760 will not operate. You can make as many system back-ups as you want.

Knowledge Base