rrrabuyvsvsveytfazersurdwarubawvev0% Interest for 24 Months! Learn more »
(800) 222-4700
  • Español: (800) 222-4701
Cart
Dad Gift Card

SweetCare®

How do I set up an insert on a channel in my AW4416 or AW2816?

1) Press the [SEL] button of the channel where an insert is to be set.

NOTE: The AW4416 will need to be in the appropriate mixing layer.

2) Press the [VIEW] button.

3) Press the [F1] button.

4) Use the ‘CURSOR’ buttons to select ‘ASSIGN’ in the ‘EFFECT INSERT’ section of the display.

5) Press the [ENTER] button. The ‘EFFECT INSERT SETTING’ popup window will be displayed. Figure 1: AW Effects Insert Pop .

6) Use the ‘CURSOR’ buttons to select ‘EXTERNAL’ in the ‘EFFECT INSERT SETTING’ popup window.

7) Press the [ENTER] button.

8) Use the ‘CURSOR’ buttons to select the ‘SEND’ parameter in the ‘EFFECT INSERT SETTING’ popup window.

9) Use the (DATA/JOG) wheel to select the ‘SEND’ output.

NOTE: The ‘SEND’ output can be any of the ‘OMNI’ outputs, any of the Card Slot outputs, the ‘DIGITAL STEREO OUT’ or the ‘ANALOG STEREO OUT’.

TIP: Once a ‘SEND’ output is selected, no other inputs, busses or auxiliaries can be assigned to that output.

10) Connect the ‘SEND’ output jack that was selected in the previous step to the input of the external device. Figure 2: AW Insert Connection Diagram .

11) Use the ‘CURSOR’ buttons to select the ‘RTN’ parameter in the ‘EFFECT INSERT SETTING’ popup window.

12) Use the (DATA/JOG) wheel to select ‘RETURN’ input.

13) Connect the output of the external device to the ‘RETURN’ input that was selected in the previous step. Figure 2: AW Insert Connection Diagram .

14) Use the ‘CURSOR’ buttons to select ‘OK’ in the display.

15) Press the [ENTER] button.

Click here for 28,000 answers to your tech questions