Roland RE-Initialization Routines

A-30 Power on while holding WRITE. (Hold for 15 seconds.)

A-33 Power on while holding WRITE. (Hold for 15 seconds.)

A-5O While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button

A-80 While holding the first, third, and fourth buttons under the display, press CHANNEL. Then press any cursor button

A-90 A-90 only; Power on while holding down EDIT, then press ENTER With Voice Expansion Board: Power on while holding down MANUAL, then press ENTER.

A-220 Power on while holding B and MEMORY.

A-880 Power on while holding SIGNAL and MEMORY

ADA-8024 No ROM reset

ALPHA JUNO-1 (Same as JUNO-i.) No ROM reset

ALPHA JUNO-2 (Same as JUNO-i.) No ROM reset

AP-7O0 Power on, then press EXIT repeatedly to get ANALYZER/Filter screen. Cursor to MENU, press ENTER. Cursor to SYSTEM, press ENTER. Cursor to INITIALIZE, press ENTER. Use VALUE to select ALL. Select EXEC and press ENTER twice

AR-Series No ROM reset.

AT-Series Power on while holding ONE TOUCH PROGRAM.

Ax-1 Power on while holding WRITE. (Hold for 30 seconds.)

AXIS-1 While holding FUNCTION, press the F#0, C#2, and D#2 keys.

CA-30 The CA-30 resets itself every time you turn it off and then on

CR-80 Power on while holding DEL and REPEAT, then press ENTER.

All Other CR No ROM reset.

CSQ-Series No ROM reset.

D-5 No ROM reset

D-10 No ROM reset.

D-20 No ROM reset

D-50 No ROM reset

D-70 No ROM reset

D-110 No ROM reset

D-550 No ROM reset

DDR-30 Power on while holding the #1 button

DEP-3 Power on while holding MEMORY NO UP and DOWN

Dep-5 Power on while holding MEMORY NO UP and DOWN

DJ-70 No ROM reset

DJ-70mkII No ROM reset

DM-Series No ROM reset

DR-5 Power on while holding FRET LEFT(<) and RIGHT(>), and then press ENTER twice.

DR-550 Power on while holding -1 and +1, then press START

DR-550mkII Power on while holding -1 and +1, then press START

DR-660 Press UTILITY, then use LEFT(<) and RIGHT(>)to select[8] INIT. Press ENTER twice

DS-330 Power on while holding REVERB and SPLIT, then press YES

E-5 No ROM reset

E-10 Power on while holding WRITE

E-12 No ROM reset

E-14US The unit resets each time you turn it on.

E-15 The unit resets each time you turn it on.

E-16 The unit resets each time you turn it on.

E-20 Power on while holding WRITE

E-28US The unit resets each time you turn it on.

E-30 Power on while holding WRITE

E-35 Power on while holding REC/PUNCH IN

E-36 Power on while holding RECORDER

E-38 The unit resets each time you turn it on.

E-56 Power on while holding WRITE

E-66 Power on while holding REC in the DISK RECORDER section

E-68US Power on while holding WRITE

E-70 Power on while holding WRITE

E-86 Power on while holding WRITE

E-96 Power on while holding WRITE

EM-101 No ROM reset

EM-303 The unit resets each time you turn it on.

EM-305 The unit resets each time you turn it on.

EP-3 The unit resets each time you turn it on.

EP-5 While holding REC and PLAY, press STRINGS. Power off and then back on
again.

EP-7 While holding REC and PLAY, press STRINGS. Power off and then back on
again.

EP-7mkII While holding REC and PLAY, press STRINGS. Power off and then
back on again.

EP-9 While holding REC and PLAY, press CHOIR. Power off and then back on again.

EP-707 The unit resets each time you turn it on.
All other EP No ROM reset

FC-100 No ROM reset

FC-100mkII Power on while holding pedals #1, #2, and #8

FC-200 Power on while holding the #10 pedal, then press the CTL pedal.

FG-10 Power on while holding CLEAR and EXIT

FG-1000 Power on while holding CLEAR and EXIT

FP-1 The unit resets each time you turn it on.

FP-8 Press FUNC and release. While holding PIANO and press FUNC again.

G-800 Power on while holding WRITE

GC-8 No ROM reset

GI-10 Power on while holding PARAMETER + and -, then press VALUE +

GM-70 Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT.
Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA
TRANSFER.

GP-8 No ROM reset.

GP-16 GP-16 Power on while holding the #6, #7, and #8 buttons. Use the
FUNCTION LEFT (<) and RIGHT (>) buttons to select “2. All Factory Preset” then
press WRITE three times.

GP-100 Power on while pressing in the PARAMETER knob, then press WRITE.

GR-09 Power on while holding Pedal #2, then press the VALUE + button. Now
press EDIT/PLAY.

GR-1 GR-1 Power on while holding WRITE/ COPY, then press YES.

GR-30 Power on while holding Pedal #2,then press the PATCH+ button to select
INI. Press EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously.

All other GR No ROM reset

GS-6 No ROM reset

GT-5 Power on while holding MOD and FEED BACKER/SLOW GEAR. Press
WRITE.

GX-700 Press TUNER/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons
to select FACT INIT. Cursor to left and dial SYSTEM, then right and dial P#100. Press
WRITE, then TUNER/ UTILITY.

HP-100 (Same as PIANO PLUS-100.) No ROM reset.

HP-300 (Same as PIANO PLUS-300.) No ROM reset.

HP-4OO (Same as PIANO PLUSAOO.) No ROM reset

All Other HP (Some also the same as PIANO PLUS-Series.) The unit resets each
time you turn it on.

HS-Series No ROM reset

JD-800 Press DATA TRANSFER. Use PAGE UP and DOWN to select FACTORY
PRESET. Press YES.

JD-990 While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES).

JP6 (Same as JUPITER-6.) No ROM reset.

JP-8 (Same as JUPITER-8.) No ROM reset

JP-8000 While holding SHIFT, press UNIT/ UTIL. Press INIT/UTIL repeatedly
to select INITIALIZE WRITE. Use the DOWN/UP buttons to select FACTORY
PRESET, then press WRITE

JS-30 Power on while holding RECORD located in the SEQUENCER section.

JUNO-1 (Same as ALPHA JUNO-1.) No ROM reset

JUNO-2 (Same as ALPHA JUNO-2.) No ROM reset

JUNO-6 No ROM reset

JUNO-60. No ROM reset

JUNO-106 No ROM reset.

JUPITER-6 (Same as JP-6.) No ROM reset

JUPITER-8 (Same as JP-8.) No ROM reset.

JV-30 Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press
VALUE Up.

JV-35 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and
DOWN to select ALL. Press VALUE UP

JV-50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and
DOWN to select ALL. Press VALUE UP

JV-80 Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS).
Press ENTER and then press WRITE.

JV-90 Power on while holding NUMBER B (also labeled PERFORM 16 and CAPS).
Press ENTER and then press WRITE.

JV-880 Press UTILITY, then use the DATA dial to select FACTORY PRESET. Press
ENTER twice

JV-l000 Power on while holding NUMBER 8 (also labeled PERFORM 16 and CAPS).
Press ENTER, then press WRITE

JV- 1080 Press UTILITY. Cursor down once, then cursor right three times to
select FACTORY PRESET. Press ENTER twice, then press UTILITY.

JV-2080 Press UTILITY. Press F6 twice to select MENU 3. Press Fl. Then
press F6. If necessary, use the VALUE DIAL to turn Memory Protect OFF and press
F6 twice.

JW-50 Press TUNE/FUNCTION. Press F5 (FACTORY), then F4 (JW RESET), then
F3 (GS RESET), then F4 (YES)

Jx-1 Power on while holding WRITE and FLUTE.

JX-3P No ROM reset.

JX-8P No ROM reset.

JX-10 (Same as SUPER ix keyboard.) No ROM reset

KR-33 The unit resets each time you turn it on.

KR-55 Hold MIDIIFUNC and press CARD. Hold both VARIATION buttons for 5
seconds.

KR-100 The unit resets each time you turn it on.

KR-350 While holding LOAD and SAVE, press WRITE.

KR-370 The unit resets each time you turn it on.

KR-500 While holding FROM and TO, press WRITE.

KR-570 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons
(Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to
get FACTORY SETUP LOAD in the window. After loading is complete, power oft and
then back on.

KR-650 While holding LOAD and SAVE, press WRITE.

KR-770 While holding PART VOLUME ACCOMP, press TRACK 2 and 4 buttons
(Composer section) simultaneously. Press PART VOLUME ACCOMP repeatedly to
get FACTORY SETUP LOAD in the window. After loading is complete, power off and
then back on.

KR-3000 While holding FROM and TO, press WRITE

KR-3500 While holding LOAD and SAVE, press WRITE.

KR-4500 While holding LOAD and SAVE, press WRITE.

KR-47OO While holding EDIT, press LOAD and SAVE.

KR-5000 While holding EDlT, press LOAD and SAVE.

KR-5500 While holding LOAD and SAVE, press WRITE.

LVC-1N Power on while holding ENTER

M-660 (Same as RHODES 660.) While holding EDIT, press WRITE. Use
PARAMETER UP and DOWN to select ALL, then press WRITE. When completed,
press EDIT to return to Play Mode.

M-760 (Same as RHODES 760.) While holding EDIT, press WRITE. Use
PARAMETER UP and DOWN to select ALL, then press WRITE. When completed,
press EDIT to return to Play Mode.

M-BD1 Power on while holding F3.

M-DC1 Power on while holding F3.

M-GS64 Power on while holding F3.

M-OC1 Power on while holding F3.

M-SE1 Power on while holding F3.

M-VS1 Power on while holding F3.

MC-303 Power on while holding down SHIFT and press ENTER

All Other MC No ROM reset

ME-5 Power on while holding pedals #1 and #2, then press WRITE immediately

ME-6 Power on while holding LEFT and DOWN, then press WRITE

ME-6B Power on while holding LEFT and DOWN, then press WRITE

ME-8 Power on while holding LEFT and DOWN, then press WRITE/COPY.

ME-8B Power on while holding PARAMETER LEFT (<) and DOWN, then press
WRITE/COPY

ME-10 Power on while holding the BANK DOWN pedal, then press WRITE.

ME-X Power on while holding PARAMETER DOWN and LEFT (<), then press
WRITE.

MK-60 (Same as RHODES MK-60.) No ROM reset.

MK-80 (Same as RHODES MK-80.) While holding WRITE, press EDIT. While
holding the LEFT (<) and RIGHT (>) cursor buttons, press UP

MKB-Series No ROM reset

MKS-50 Poly Mode: Power on while holding NUMBER 4 and 8. Mono Mode:
Power on while holding NUMBER 3 and 7.

All Other MKS No ROM reset.

MP-Series No ROM reset.

MS-1 No ROM reset.

MSQ-100 No ROM reset

MSQ-700 No ROM reset.

MT-32 While holding MASTER VOLUME, press RHYTHM PART. Press PART 1.

MT-80 The unit resets each time you turn it on.

MT-100 While holding STOP, press DELETE. After the display flashes ALL CLEAR,
press EXECUTE.

MT-120 Power on while holding REPEAT, SONG (blue button), and PLAY. Press
FWD repeatedly, until the window reads T-13. Press PLAY, then press REC. Power
oft, then on.

MT-120s Power on while holding REPEAT, SONG (blue button), and PLAY.
Press FWD repeatedly, until the window reads T-13. Press PLAY, then press REQ.
Power off, then on.

MT-200 Power on while holding REPEAT, SONG (blue button), and PLAY. Use the
DIAL to select T-15 in the window. Press PLAY, then press REC. Power off, then on.

MV-30 (Same as STUDIO M.) No ROM reset

OCTAPAD (Same as PAD-8.) Power on while holding MIDI CH and NOTE
NUMBER. Power off and then back on.

OCTAPAD II (Same as PAD-80.) Power on while holding both VALUE (solid
) buttons.

P-55 Power on while holding both INSTRUMENT buttons, then press PARAM 1.

P-330 No ROM reset.

PAD-8 (Same as OCTAPAD.) Power on while holding MIDI CH and NOTE NUMBER.
Power off, then back on.

PAD-80 (Same as OCTAPAD 11.) Power on while holding both VALUE (solid
) buttons.

PC-150 Power on while holding COMMAND on the left edge of the keyboard.

PC-200 Power on while holding the two buttons under the word STANDARD.

PC-2OOmkII Power on while holding the two buttons under the word
STANDARD.

All PIANO PLUS (Same as some of the HP-Series.) No ROM reset

PK-5 Power on while holding OCT/PARAM

PLANET-P (Same as MKS-iO.) No ROM reset

PLANET-S (Same as MKS-30.) No ROM reset.

PM-16 Power on while holding NUMBER buttons 1 and 2. (This reloads the first
BANK of settings.)

PMA-5 Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select
INITIALIZE.Press ENTER, then [EXEC].

PR-1OO The unit resets each time you turn it on.

PRO-E Power on while holding WRITE

R-5 Power on while holding CURSOR PAGE and PARAM SELECT, then press
ENTER twice.

R-8 Power on while holding CURSOR PAGE and PARAM SELECT, then press
ENTER twice

R-8mkII Power on while holding CURSOR PAGE and PARAM SELECT, then press
ENTER twice.

R-8M Power on while holding ENTER and the RIGHT (>) CURSOR button, then
press ENTER twice.

R-70 Power on while holding MIDl and ASSIGN, then press YES twice.

R-880 No ROM reset.

RA-30 The unit resets each time you turn it on.

RA-5O Power on while holding WRITE

RA-90 Power on while holding WRITE

RA-95 Power on while holding REQ

RA-800 (WARNING: This will erase the original factory Performance settings.
However, you can save them to disk before doing this procedure.) Power on while
holding WRITE.

RD-500 Power on while holding NUMBER 1 and 8. Press DEC/YES.

RD6OO Press EDIT. Press the RIGHT PAGE button until “Initialize: All” is
displayed. Press INC/YES twice. Press EDIT to return to Play mode.

All Other RD No ROM reset.

RHODES 660 (Same as M-760.) While holding EDIT, press WRITE. Use
PARAMETER UP and DOWN (v) to select ALL, then press WRITE. When
completed, press EDIT to return to Play Mode.

RHODES 760 (Same as M-760.) While holding EDIT, press WRITE. Use
PARAMETER UP and DOWN (v) to select ALL, then press WRITE. When
completed, press EDIT to return to Play Mode.

RHODES MK-60 Same as MK-6O.) No ROM reset

RHODES MK-80 (Same as MK-80.) While holding WRITE, press EDIT. While
holding the LEFT (<) and RIGHT (>) cursor buttons, press UP.

RSP-550 Power on while holding PROGRAM/PAGE UP and DOWN, then
press WRITE.

RSS-1O Power on while holding LOCK and OPTION. (The MCR-8 LED
lights.) Press DEMO PROGRAM four times. Press DEVICE ID

RSS-8048 No ROM reset

RV-70 Power on while holding WRITE and DOWN. Use the UP and DOWN buttons
to select AL. Press WRlTE. Power off, then back on

SB-55 Power on while holding CLEAR.

SBX-100O No ROM reset.

S-Series No ROM reset

SC-7 The unit resets each time you turn it on.

SC-33 Power on while holding REVERB and SPLlT, then press YES.

SC-5O Power on while holding both INSTRUMENT buttons, then press ALL.

SC-55 Power on while holding both INSTRUMENT buttons, then press ALL.

SC-55mk11 Power on while holding both INSTRUMENT buttons, then press
ALL.

SC-88 While holding SELECT, press both INSTRUMENT buttons. Press ALL.

SC-155 Power on while holding both INSTRUMENT buttons, then press ALL.

SCC-700C No ROM reset.

SD-35 Power on while holding CLEAR, then press REC.

SDD-320 No ROM reset.

SDE-330 Power on while holding SYSTEM and PROGRAM. Use the DATA
dial to select SYSTEM + PROGRAM. Press MEMORY.

All Other SDE No ROM reset

SDX-330 Power on while holding SYSTEM and PROGRAM. Use the DATA
dial to select SYSTEM + PROGRAM. Press MEMORY.

SE-5O Power on while holding PARAM UP (A) and VALUE UP. Press WRITE. Wait
three seconds and press WRITE again.

SE-70 Power on while holding in the NUMBER/VALUE knob. Press PARAMETER
LEFT (<), then dial to STANDARD mode or GUITAR mode. Press WRITE. SH-Series No ROM reset. SN-700 No ROM reset. SP-700 No ROM reset SPD-8 Power on while holding EDIT, then press COPY. Use the VALUE UP and
DOWN to select F A L in the window. Press ALL/ENTER.

SPD-11 Power on while holding ALL/ENTER and DOWN (the solid v). Press
ALL/ENTER again

SRC-2 No ROM reset.

SRV-330 Power on while holding SYSTEM and PROGRAM. Use the DATA
dial to select SYSTEM + PROGRAM. Press MEMORY.

SRV-1OOO No ROM reset.

SRV-2000 Factory; Power on while holding WRITE and REVERB
NON-LINEAR.Delay Mode: Power on while holding WRITE, REVERB NON-LINEAR
and ROOM SIMULATE.

SSC-8004 No ROM reset

STUDIO M (Same as MV-30.) No ROM reset

SUPER JUPITER (Same as MKS-80.) No ROM reset

SUPER JX keybrd (Same as JX-1O.) No ROM reset.

SUPER JX module (Same as MKS-70.) No ROM reset.

SUPER QUARTET (Same as MKS-7.) No ROM reset.

All SYNTH PLUS (Same as HS-Series.) No ROM reset.

SX-700 Press UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) to select FACT
INIT. Press WRITE.

TB-303 No ROM reset

TD-5 Power on while holding EDIT and START/STOP, then press START/STOP
again.

TD-7 Press SYSTEM. Use the LEFT (<) and RIGHT (>) CURSOR buttons to select
INI, then press ENTER. Cursor to HI HAT and use the DATA dial td select ALL. Press
ENTER twice.

TD-1O Press SETUP, then press F4 three times.

TL-Series No ROM reset

TP-20 No ROM reset

TR-505 Power on while holding MODE and PATTERN GROUP KEY A.

TR-626 Power on while holding MODE and TRACK #1.

TR-707 Power on while holding TRACKWRITE and PATTERN #1

TR-727 Power on while holding TRACKWRITE and PATTERN #1

TR-808 No ROM reset.

TR-909 Power on while holding TRACK#1 and PATTERN #1

U-20 No ROM reset.

U-110 Power on while holding PART and EDIT.

U-220 No ROM reset.

VG-8 Power on while holding Fl, F31 and F5. Press F6 for All, F4 for Patches, or
F2 for System

VK-1000 Press WRITE, then press F3 to access the INIT MENU screen. Press
F4 to access the COLD BOOT screen, then press ENTER

VP-70 Power on while holding PLAY, VOICE EXPANSION, and MIDI.

VS-880 No ROM reset

VT-I Power on while holding down the PRESET/USER button.

W-30 No ROM reset

W-50 Press CONTROL and MASTER simultaneously. Use PARAMETER UP and
DOWN to select ALL. Press VALUE UP

XP-10 Press UTILITY. Use VALUE + and – to select INITIALIZE, then press ENTER.
Use VALUE + and – to select FACTORY PRESET, then press ENTER.

XP-50 Press DISK/UTILITY, select SOUND, select PRESET, then press ENTER.
Use the dial to turn Memory Protect OFF if necessary, then press ENTER twice.

XP-80 Press UTILITY, press F6 (MENU) twice to select Factory, then ENTER. Press
F6 (EXECUTE). Use the dial to turn Memory Protect OFF if necessary, press ENTER,
then press F6 (EXECUTE).

Knowledge Base