Roland MC-202 Technical Specifications
MC-202 MICRO COMPOSER
MICRO COMPOSER SECTION
MEMORY CAPACITY:
Approx. 2600 Steps
OUTPUT:
External CV Output
If the MC – 202s Keyboard is in use : 416. 5mV to 5V, 44
Steps
If the External Keyboard is in use : 0 to 5V, 49 Steps (83.3mV
/ Step) : 1
External Gate Output (When OFF : 0V, ON : 12V)
Built – In CV Output: 1
Built – In Gate Output: 1
INPUT (Keyboard Input): CV IN (0V to 5V) : 1
GATE IN (Turned on With Over + 3V): 1
Calibration Trimmer: 1
TAPE INTERFACE:
MEMORY SAVE (TAPE SYNC OUT) : 1
MEMORY LOAD (TAPE SYNC IN) : 1
DIN SYNC:
DIN Socket IN: 1
OUT: 2
TEMPO:
Tempo Knob (Quarter note = 40 to 300): 1
DISPLAY:
Liquid Crystal Display: 1
Indicator: 1
SYNTHESIZER SECTION
KEYBOARD: 32 Key, F scale
VCO:
Range (16, 8, 4)
Pulse Width Modulation (50% to Min.)
PWM Selector Switch (ENV / MAN / LFO)
Modulation Depth
Tune ( + 100 Cent)
SOURCE MIXER:
VCF:
Cutoff Frequency (10 Hz to 20 kHz)
Resonance (0 to Self Oscillation)
ENV Depth
Modulation Depth
Keyboard Follows (0 to 100%)
VCA:
Control Signal Selector Switch (ENV ????? / GATE ???? )
ENV:
Attack Time (2ms to 1.5s)
Decay Time (2ms to 5s)
Sustain Lever (0 to 100%)
Release Time (1ms to 5s)
LFO:
LFO Rate (o.1 Hz to 30 Hz)
LFO Rate Indicator
Decay Time (0 to 1s)
PORTAMENTO:
Portamento Time (0 to 2s)
ACCENT
VOLUME
CONNECTION JACKS:
Output (0 dBm max.)
Headphones (Stereo 8W to 150W)
DC Input (9V to 12V AC Adaptor PSA – 120, 220 or 240)
POWER SWITCH:
POWER:
DC 9V (C cell x 6 or PSA – 120, 220 or 240)
CONSUMPTION:
800 mW
DIMENSIONS:
343 (W) x 55 (H) x 204 (D) mm
13 – 1 / 2 (W) x 2 – 3 / 16 (H) x 8 (D) inches
WEIGHT (Batteries Included):
1.35kg (3 lb.)
ACCESSORIES:
2.5m Connection Cable PJ-1 x 1
Sample Tape (For Demonstration) x 1
C Cell Batteries (BR-2) x 6
Operation Manual x 1
OPTIONS:
Headphones: RH-10
AC Adaptor: PSA-120, 220, 240
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
Offer applies only to single-receipt qualifying purchases. Select manufacturers may require that only the manufacturer’s products qualify towards the minimum purchase amount needed to be eligible for promotional financing. Otherwise, an invoice that meets the minimum purchase amount and contains at least one qualifying manufacturer product is eligible for promotional financing. No interest will be charged on promo purchase balance, and equal monthly payments are required on promo purchase until it is paid in full. The payments equal the amount financed divided by the number of months in the promo period, rounded up to the next whole dollar. These payments may be higher than the payments that would be required if this purchase was a non-promo purchase. During the last month(s) of the promo period the required monthly payment may be reduced due to the prior months’ rounding. Regular account terms apply to non-promo purchases. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
Offer applies only to single-receipt qualifying purchases. No interest will be charged on the promo balance if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo balance from the purchase date. The required minimum monthly payments may or may not pay off the promo balance before the end of the promo period, depending on purchase amount, promo length and payment allocation. Regular account terms apply to non-promo purchases and, after promo period ends, to the promo balance. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
The estimated required monthly payment shown which excludes taxes and delivery equals the amount financed divided by the number of months in the promo period, rounded up to the next cent. During the last month(s) of the promo period the required monthly payment may be reduced due to this rounding. These payments apply only with the financing offer shown. If you make these payments by the due date each month, you should pay off this amount financed within the promo period, if it is the only balance you are paying off. If you have other balances on your account, this payment will be added to any other minimum monthly payments.
Applies only to select items from this manufacturer. Ask your Sweetwater Sales Engineer for more details.