Roland GT-PRO Clearing a Patch (Patch Initialize)
You can clear, or “initialize” any user patch. This can be handy when you want to build a patch from scratch and want to start with a clean slate. Use the following steps to initialize a user patch.
Note: Initializing completely resets the parameters of the selected patch. If you’ve edited the current patch, or want to keep the factory user patch, be sure to write it to another user memory location before initializing.
1. Turn the PATCH/VALUE dial to select the user patch you’d like to initialize.
2. Press the WRITE button.
3. Press the PARAMETER > button twice so that “INIT”
appears in the display. To cancel the initialization process at this point, press EXIT.
4. Press WRITE. The patch is now initialized.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
