Roland ADA-7000 Technical Specifications
ADA-7000 8-channel AD/DA Converter
SIGNAL PROCESSING
AD Conversion: 24 bits, 64 times oversampling
DA Conversion: 24 bits, 128 times oversampling
SAMPLE RATE
96.0 kHz, 48.0 kHz, 44.1 kHz, 32 kHz
FREQUENCY RESPONSE
Sample Rate
96.0 kHz: 6 Hz – 44 kHz
48.0 kHz: 6 Hz – 22 kHz
44.1 kHz: 6 Hz – 20 kHz
32.0 kHz: 6 Hz – 14 kHz
NOMINAL INPUT LEVEL
Input 1-8: -64 to +4 dBu
INPUT IMPEDANCE
Input 1-8 (XLR type): 10k ohm
Input 1-8 (1/4 inch phone type): 10k ohm
NOMINAL OUTPUT LEVEL
Ouput 1-8: +4 dBu (XLR type)
Ouput 1-8: -10 dBu (RCA phono type)
OUPUT IMPEDANCE
Output 1-8 (XLR type): 600 ohm
Output 1-8 RCA phono type): 300 ohm
RECOMMENDED LOAD IMPEDANCE
Output 1-8 (XLR type): 10k ohm or greater
Output 1-8 (RCA phono type): 10k ohm or greater
CONNECTORS AND JACKS
Input 1-8 (XLR type, balanced, phantom power)
Input 1-8 (1/4 inch phone type, TRS balanced)
Output 1-8 (XLR type, balanced)
Output 1-8 (RCA phono type)
R-BUS (RMDB2) Connector (DB-25 type)
Word Clock In (BNC type, with terminator switch)
Word Clock Out (BNC type)
AC Inlet
POWER SUPPLY
AC 117V, AC 230V, AC 240V
POWER CONSUMPTION
19W
DIMENSIONS
482(W) x 293(D) x 88.9(H) mm
196(W) x 11-9/16(D) x 3-1/2(H) inches
WEIGHT
5.1 kg / 11 lbs 4 oz
ACCESSORIES
R-BUS cable (1m)
AC Cord
Owner’s Manual
OPTIONS
V-Mixing Station: VM-3100Pro
V-Mixing Station: VM-C7200, VM-C7100
V-Mixing Processor: VM-7200, VM-7100
24-bit Digital Studio Recorder: VSR-880
* 0 dBu = 0.775 V rms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
Offer applies only to single-receipt qualifying purchases. Select manufacturers may require that only the manufacturer’s products qualify towards the minimum purchase amount needed to be eligible for promotional financing. Otherwise, an invoice that meets the minimum purchase amount and contains at least one qualifying manufacturer product is eligible for promotional financing. No interest will be charged on promo purchase balance, and equal monthly payments are required on promo purchase until it is paid in full. The payments equal the amount financed divided by the number of months in the promo period, rounded up to the next whole dollar. These payments may be higher than the payments that would be required if this purchase was a non-promo purchase. During the last month(s) of the promo period the required monthly payment may be reduced due to the prior months’ rounding. Regular account terms apply to non-promo purchases. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
Offer applies only to single-receipt qualifying purchases. No interest will be charged on the promo balance if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo balance from the purchase date. The required minimum monthly payments may or may not pay off the promo balance before the end of the promo period, depending on purchase amount, promo length and payment allocation. Regular account terms apply to non-promo purchases and, after promo period ends, to the promo balance. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
The estimated required monthly payment shown which excludes taxes and delivery equals the amount financed divided by the number of months in the promo period, rounded up to the next cent. During the last month(s) of the promo period the required monthly payment may be reduced due to this rounding. These payments apply only with the financing offer shown. If you make these payments by the due date each month, you should pay off this amount financed within the promo period, if it is the only balance you are paying off. If you have other balances on your account, this payment will be added to any other minimum monthly payments.
Applies only to select items from this manufacturer. Ask your Sweetwater Sales Engineer for more details.