How Can I Record Directly to a CD with my BR-900?

To record a CD directly from the line inputs on a BR-900 use the following procedure.

1) Press UTILITY
2) CURSOR to SYSTEM
3) Press ENTER
4) CURSOR to SubMixer
5) Use the VALUE wheel to turn it to ON.
6) Press EXIT two times.
7) Place a blank CDR into the disk drive and close the tray.
8) Press the REC MODE button until BOUNCE is diplayed.
9) CURSOR to the upper right corner of the LCD diplay.
10) Turn the VALUE wheel clockwise until CD is displayed.
11) Adjust the L-LINE-R SENS knob to adjust the incoming signal.
12) Press REC and PLAY.

Knowledge Base