All Articles
Is it necessary that the video cables connected to the USD be of a particular impedance? Do they have to be 75 ohm?
Updated on Apr 27, 2007 at 12:00 AMError, “USD can’t lock to current video reference. Please check cables and video reference source.” in Pro Tools when trying to use Video Reference (black burst / house sync) coming from a video deck or a black burst generator. The Locked LED is flashing on the USD.
Updated on Apr 27, 2007 at 12:00 AMAfter downloading the correct drivers from MOTU, Windows will not detect the MTP AV (via the parallel port).
Updated on Apr 27, 2007 at 12:00 AMWhich pin is “hot” on Focusrite products
Updated on Apr 27, 2007 at 12:00 AMPro Control Main Pot Replacement Instructions
Updated on Apr 27, 2007 at 12:00 AM“Unable to create DAE Deck” error when launching Pro Tools 5.0.1. PTIII system (Disk I/O and DSP Farm) in a 2001 model G4 with OS 9.1.
Updated on Apr 27, 2007 at 12:00 AMLive Sound Mixing Tips Gain Structure applied in the real world.
Updated on Apr 27, 2007 at 12:00 AMImportant issues for small CD duplication runs
Updated on Apr 27, 2007 at 12:00 AMWhy does my fader volume sometimes “jump” down to a much lower level when I adjust it?
Updated on Apr 27, 2007 at 12:00 AMIs the time stamp automatically stored in a Sound Designer II file when recorded with Pro Tools?
Updated on Apr 27, 2007 at 12:00 AMUSD / Universal Slave Driver Reset / Initialize (Restores to Factory Settings) USD / Universal Slave Driver Reset / Initialize
Updated on Apr 17, 2012 at 5:22 PMSynching that old drum machine to your recorder.
Updated on Apr 27, 2007 at 12:00 AMMore info on racks (tips for building your own)
Updated on Apr 27, 2007 at 12:00 AMDAE -6042 error at playback
Updated on Apr 27, 2007 at 12:00 AMGetting DAE errors -9161, -9162 and/or -6046 when launching Pro Tools.Another symptom is that the Macintosh Operating System may be acting very sluggish, i.e. with every command you choose, such as “Open” from the File menu, you get the “tapping fingers” and the OS response is slow and delayed.
Updated on Apr 27, 2007 at 12:00 AMOffer applies only to single-receipt qualifying purchases. Select manufacturers may require that only the manufacturer’s products qualify towards the minimum purchase amount needed to be eligible for promotional financing. Otherwise, an invoice that meets the minimum purchase amount and contains at least one qualifying manufacturer product is eligible for promotional financing. No interest will be charged on promo purchase balance, and equal monthly payments are required on promo purchase until it is paid in full. The payments equal the amount financed divided by the number of months in the promo period, rounded up to the next whole dollar. These payments may be higher than the payments that would be required if this purchase was a non-promo purchase. During the last month(s) of the promo period the required monthly payment may be reduced due to the prior months’ rounding. Regular account terms apply to non-promo purchases. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
Offer applies only to single-receipt qualifying purchases. No interest will be charged on the promo balance if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo balance from the purchase date. The required minimum monthly payments may or may not pay off the promo balance before the end of the promo period, depending on purchase amount, promo length and payment allocation. Regular account terms apply to non-promo purchases and, after promo period ends, to the promo balance. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
The estimated required monthly payment shown which excludes taxes and delivery equals the amount financed divided by the number of months in the promo period, rounded up to the next cent. During the last month(s) of the promo period the required monthly payment may be reduced due to this rounding. These payments apply only with the financing offer shown. If you make these payments by the due date each month, you should pay off this amount financed within the promo period, if it is the only balance you are paying off. If you have other balances on your account, this payment will be added to any other minimum monthly payments.
Applies only to select items from this manufacturer. Ask your Sweetwater Sales Engineer for more details.