Macintosh Installation Instructions for the EZBus
– With any Mac OS from OS 9.04 up to and including OS X 10.1, the
EZbus will automatically be recognized as a USB audio device, with
no additional drivers required.
Note: You must have the USB Configuration mode in the EZbus System menu set to AUDIO ONLY. To use MIDI, connect MIDI 2 Out on the EZbus rear panel to your
Macintosh-compatible MIDI interface and follow the instructions included with your interface.
– With a Mac OS newer than OS X 10.1, the EZbus will automatically
be recognized as a USB audio and MIDI device, with no additional
drivers required.
Note: You must have the USB Configuration mode in the EZbus System menu set to Audio+MIDI.
Macintosh Installation Instructions
Users must set up the EZbus as detailed below before connecting the EZbus to a computer via USB.
* Be certain that the EZbus is not connected to your computer via USB.
* On the EZbus, press system, followed by the next button repeatedly until the display reads: USB Configuration: Audio+MIDI+Bulk
* Rotate the value wheel until the EZbus display reads:
USB Configuration: Audio Only
* The system LED will now be blinking. Double-click on the system button; the EZbus display will read: Changing USB Mode!
* Connect the EZbus to your computer using the supplied USB cable, and apply power to the EZbus. This completes the EZbus installation.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
