How do I load a PCM board in my Triton rack?

The Triton Rack supplies 8 EXB or external banks, which are reserved to hold the sounds from the EXB expansion boards. The following discusses the procedure for loading the sound disks into an EXB bank. The first applies to all boards EXCEPT EXBPCM-03, which requires additional steps, discussed in the second part of this tutorial.

To load an EXB soundest into an external bank:

1. Insert the floppy disk that matches the expansion board you have placed in one of the slots E-A to E-H.
2. Press the DISK button.
3. With “C_Bank.PCG” highlighted”, press “F8” button, (“Utility” on the screen)
4. Press the down cursor repeatedly until “Load Selected” is highlighted.
5. Press the F8 Key (“OK” on screen).
6. Press the down cursor button twice to select “PCG Contents “ALL”.
7. Using the value dial, value slider or the INC/DEC buttons, set “ALL” to “I-C”. Note: “I-C” indicates that you’ll be loading the previously selected C_Bank..PCG from the disk.
8. Press the right cursor button to highlight the parameter “I-A” on the screen. This is the variable that selects the destination bank where the file will be placed.
9. Using the value dial or the INC/DEC buttons, select your external bank of choice, “E-A to E-H”.
10. Press F8 to load.

Knowledge Base