How do I load Patches and Samples from an external SCSI drive?
With properly installed compatible SIMMS memory, samples can be loaded into the XV-5080 from an external SCSI drive.
To load a sample patch from a SCSI drive, use the following procedure:
1. Press PATCH.
2. Press DISK.
3. Press F1 (Load).
4. Press F1 (Drive).
5. Rotate the VALUE to select the SCSI drive that contains the samples.
6. Press F6 (Ok).
7. Use the UP and DOWN CURSOR buttons to select PATCH.
8. Press the RIGHT CURSOR button to open the Patch folder.
9. Use the UP and DOWN CURSOR buttons to highlight the Patch that you wish to load.
10. Press F5 (MARK) to Mark the Patch.
11. Press F6 (Select).
12. Press F6 (Load).
13. Rotate the VALUE DIAL to select a destination for the Patch.
14. Press F6 (OK).
15. Press F6 (OK).
16. Press PATCH.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
