Configuration for synchronizing Pro Tools and Studio Vision Pro/Vision DSP via MIDI Machine Control (MMC).
In OMS Setup:1) Double click on the IAC Driver and create 2 IAC busses, one for Time Code and the other for MIDI Machine Control. (Note: the name of the IAC bus used for MIDI Machine Control must start with “MMC” and this is case sensitive.)2) Open the “OMS MIDI Setup” window (Edit menu) and enable “Run MIDI In BackgroundIn Vision:3) Open the Enable Input Devices window (Setups menu) and enable the IAC bus named “Time Code4) Open the Sync Option window (Windows menu) and: – Set Receive Sync to “MTC/Machine Control – Select the “Time Code”IAC Bus – Enable “Remote Start – Set Send Sync to “None – Select the appropriate SMPTE Frame Rate (this should match the Frame Rate in Pro Tools)5) Set the Offset of your sequence (click the little “i”in the upper left if you don’t see this) to be the same or later than the Session Start Time in Pro ToolsIn Pro Tools:6) Open the Peripherals window (Setups menu) – Click the Synchronization button – Enable (check) “Enable Control of Pro Tools…” – Set the ID to 0 (zero)7) Open the Session Setup window and: – Select the Frame Rate that matches the Frame Rate in Vision – Set the Session Start time to match the sequence’s Offset – Enable “MTC To Port” – Select the IAC bus named “Time Code8) Enable “MMC” in the Enable Input Devices window (PT 5.x and later)
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
Offer applies only to single-receipt qualifying purchases. Select manufacturers may require that only the manufacturer’s products qualify towards the minimum purchase amount needed to be eligible for promotional financing. Otherwise, an invoice that meets the minimum purchase amount and contains at least one qualifying manufacturer product is eligible for promotional financing. No interest will be charged on promo purchase balance, and equal monthly payments are required on promo purchase until it is paid in full. The payments equal the amount financed divided by the number of months in the promo period, rounded up to the next whole dollar. These payments may be higher than the payments that would be required if this purchase was a non-promo purchase. During the last month(s) of the promo period the required monthly payment may be reduced due to the prior months’ rounding. Regular account terms apply to non-promo purchases. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
Offer applies only to single-receipt qualifying purchases. No interest will be charged on the promo balance if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo balance from the purchase date. The required minimum monthly payments may or may not pay off the promo balance before the end of the promo period, depending on purchase amount, promo length and payment allocation. Regular account terms apply to non-promo purchases and, after promo period ends, to the promo balance. New Accounts as of 07/31/2025: Purchase APR is 34.99%. Penalty APR is 39.99%. Min Interest Charge is $2. Existing cardholders: See your credit card agreement terms. Subject to credit approval.
The estimated required monthly payment shown which excludes taxes and delivery equals the amount financed divided by the number of months in the promo period, rounded up to the next cent. During the last month(s) of the promo period the required monthly payment may be reduced due to this rounding. These payments apply only with the financing offer shown. If you make these payments by the due date each month, you should pay off this amount financed within the promo period, if it is the only balance you are paying off. If you have other balances on your account, this payment will be added to any other minimum monthly payments.
Applies only to select items from this manufacturer. Ask your Sweetwater Sales Engineer for more details.