Can I change the BNC outpus on my AardsyncII? If so, which ones can I change?
You can change any of the BNC outputs on the back of the AardSync II
BNC #1 256x OR 1x word clock
BNC #2 256x OR 1x word clock
BNC #3 1X OR 2X Word Clock (2X is for 88.2/96kHz)*
BNC #4 1X OR 2X Word Clock (2X is for 88.2/96kHz)*
AES/EBU outputs #5 & #6 are not changeable
BNC Video Input is not changeable
*BNC #3 & #4 are only changeable with S/N 3022491 or higher
To open the AardSync II and access the jumpers, remove the back panel and slide the top of the unit backwards. The front panel must not be removed. On the back panel, first remove the hex nuts on the BNC connectors, then remove the back panel screws and take off the back panel and plastic bezel. Then slide the top of the AardSync II until it comes off.
When you need help, Sweetwater has the answers!
Our knowledge base contains over 28,000 expertly written tech articles that will give you answers and help you get the most out of your gear. Our pro musicians and gear experts update content daily to keep you informed and on your way. Best of all, it’s totally FREE, and it’s just another reason that you get more at Sweetwater.com.
