How do I bind a TranzPort remote to a TranzPort USB interface?

1. Make sure the TranzPort remote control unit is powered on (Press the BATTERY button and look at the display to verify that the batteries are sufficiently charged.)

2. Make sure the TranzPort USB interface is connected to the USB port of a computer that has TranzPort Drivers correctly installed. (The TranzPort icon should be in the task bar/status bar.)

3. Push the button on the TranzPort USB interface. Its light should start to blink quickly. (if the USB interface you are attempting to bind with is currently bound with another TranzPort remote you will have to put the first TranzPort remote into sleep mode before it will release the USB interface to another unit)

4. On the TranzPort remote, press and hold the SHIFT button while you press the BATTERY button. The message “BINDING…PLEASE WAIT…” should appear in the display indicating that the USB interface is searching for a TranzPort remote that’s available for binding.

5. Once the USB interface finds the remote, its LINK light should go on, and the USB interface’s light should stay on solid. The Units are now bound with a shared code number.

Knowledge Base