How to assign your Continuous Controller Pedals Globally?

1) from your program page, hit the SETUP key
2) choose ’97controlsetup’ by turning your dial or using your cursor buttons
3) Hit the EDIT key
4) Hit the Right MORE button once at the far right side of the screen
5) this changes the soft button options –
6) hit the CPEDAL soft key
7) you will see both Cped1 and Cped2 – choose whichever pedal you are using…
8) once you highlight the DEST section you can change the Midi controller to any of the 127 controller messages
9) then hit EXIT key once… it will ask you to SAVE CHANGES
10) hit YES and it will give you a number of ID#200.
at this time you can save on whatever number you want to choose
11) once you hit YES again you will be back to the SETUP page
12) hit the EXIT key one more time and you are now back to the program page
13) hit the MIDI key which brings you to the TRANSMIT page
14) the first parameter on the page is the CTLSetup – using your dial scroll until you find the SETUP that you just created and hit EXIT
and you shall be on your way…..

Knowledge Base