Where is the 1st place to go to set up OUTPUTS?

We also need to set up the outputs properly for our needs. We need to make sure Direct
outs 1-8 are going to TDIF 1, Direct outs 9-16 are going to TDIF 2 and Buss 1-8 is going
to TDIF 3. While we’re here we’ll also assign the Stereo buss to Digital Out 1.
With the SHIFT key indicator lit, press the
I/O key followed by soft key #3. Use the
cursor keys to highlight the first Output
Signal field. Use the data dial to scroll to
BUSS 1-8/DIRECT 1-8 and press
ENTER. Use the same technic to change
the next field to BUSS 1-8/DIRECT 9-16.
The next field should be BUSS 1-
8/DIRECT 1-8. Set the fourth field to
STEREO.

Knowledge Base