Class A Warmth with Class AB Muscle
Power-hungry floorstanding speakers require an amplifier that can keep them steady at all volume levels, and Eversolo's AMP-F10 delivers that steadfast control to your 2-channel system. At everyday listening levels, the AMP-F10 runs in Class A for warmth and fine detail. When the music demands more, it shifts into Class AB, delivering 200 watts per channel into 8 ohms, or up to 950 watts in bridged mode. The AMP-F10 provides you with the intimacy of Class A without the heat and enough headroom to clearly hear a track’s full dynamic range. Balanced XLR and unbalanced RCA inputs connect to your preamp, DAC, or streamer, and a 2-position gain switch matches the amp to your speakers. You also get front-panel VU meters that immediately show how hard the amp is working. From late-night background listening to a rocking house party, the AMP-F10 ensures your speakers sound their best.
Related Videos: AMP-F10 Power Amplifier
Fine detail where you listen most
Most listening happens at low and moderate levels, which is why the Class A bias is the first feature Sweetwater's home audio experts point out to those considering the AMP-F10. With total harmonic distortion plus noise (THD+N) at an incredibly low 0.008%, you'll be able to hear the texture of a bowed cello and the breath behind a vocal. When you turn it up, the output stage shifts into Class AB, delivering full power without the heat and energy draw of a pure Class A design. The AMP-F10 sounds rich and detailed at a whisper, yet stays composed at full tilt.
Power and control for demanding speakers
With 200 watts per channel into 8 ohms, 320 watts into 4 ohms, and 450 watts into 2 ohms, the AMP-F10 only gets stronger as impedance drops. Likewise, a damping factor above 600 keeps woofers in check for a tight, well-defined low end. Bridged mode delivers 650 watts into 8 ohms or 950 watts into 4 ohms, and two AMP-F10s can also operate as a stereo pair of monoblocks, powering up together through the Trigger Out. When you bring the AMP-F10 into your hi-fi system, even speakers with the toughest impedance curves get all the current they require.
Eversolo AMP-F10 Features:
- Class AB stereo power amp with Class A bias delivers warm detail and serious headroom for 2-ch. hi-fi systems
- Runs in Class A at low and moderate power; shifts to Class AB at high output to lower the heat and power draw of pure Class A
- Stable into loads as low as 2 ohms, with a damping factor of 600+ for tight, defined bass, even from power-hungry speakers
- Stereo/bridge mode switch turns the amp into a high-power mono amplifier; add a 2nd AMP-F10 to run as a pair of monoblocks
- DC filtering circuit and independent left and right channels keep hum and crosstalk down for a quiet background and precise imaging
- Balanced XLR and unbalanced RCA inputs with switchable 23dB/29dB gain to match your speakers' sensitivity
- Front-panel VU meters for immediate output monitoring
- 5V–12V trigger input and signal-sensing auto-standby for hands-free power management
- Overcurrent, overheat, and short-circuit protection with large heatsinks for stable, long-term operation
