Egnater Vengeance 120-watt Tube Head

This High-gain Amp Has Attitude

This article was Written By

Our Product Research Team

Get to know them!

Its name should tell you that the Egnater Vengeance tube guitar amplifier head is a tonal force to be reckoned with. Sure, this 2-channel, 120-watt tube amp can conjure smooth clean tones and bluesy crunch with ease, but the real mojo starts when you crank up the gain. The Vengeance is the perfect high-gain amplifier for modern rock with a ton of gain on tap while retaining excellent note definition and clarity. And thanks to the switchable 60-watt or 120-watt operation, you can drop the power of the Vengeance to get the tone of a screaming stack at a lower volume level. Bottom line: you'll rock harder with the Egnater Vengeance tube guitar amplifier head in your rig.

Related Videos: Vengeance 120-watt Tube Head

• Made for aggression
• Switch to half-power and double the flexibility
• Ready for life on the road

The Egnater Vengeance is ready to pummel your audience. This 120-watt monster isn't just loud, though; it's also got the note definition and clarity you need to pull off lightening-fast fretwork that doesn't dissolve into an indistinct mess. You can tailor the Vengeance's attitude to suit your music - presence and density controls let you dial in just the right amount of bite, and tight and bright voicing switches on each channel are great for balancing your rhythm and lead tones. And thanks to a switchable secondary master volume control, you can kick in a volume boost for solos to really be heard.

Let's face it: there aren't a lot of places that you can really peg a 120-watt amp and get away with it, or at least get invited back. You can drop the Vengeance from 120-watt operation to 60-watt operation and get a screaming amp sound at a more reasonable volume. It's also perfect for recording, where louder is not always better. Switchable power makes the Vengeance a versatile amp for any performing or recording guitarist.

Life on the road is tough, but the Egnater Vengeance can take it. Birch plywood construction sounds great and can take a beating, and the metal corners and handles are heavy-duty, too. And the Vengeance comes with a durable six-button metal footswitch, so it's ready to gig right out of the box.

• 2-channel tube amplifier with switchable 60-watt or 120-watt operation
• Individual reverb on each channel with spillover when switching channels for a natural sound
• Tight, bright, and mid voicing switches give you much more tonal control than standard tone knobs alone
• Secondary master volume can be switched on/off for volume boosts
• Assignable FX loop can be applied to either or both channels
• XLR output for direct, speaker-emulated recording
• 6-button footswitch included