Complete Room Correction for Any Studio
Have you ever mixed a song that sounded awesome in your studio, but then you heard it played on another system in another room and thought, “What happened?” Sweetwater studio engineers have been there before and know all too well the sheer dismay such experiences cause. Thankfully, IK Multimedia is here to make these panic-inducing moments a thing of the past with the ARC Studio Advanced Room Correction System. This comprehensive setup combines a measurement mic, software, and an external hardware processor to create a simple, highly effective acoustic correction solution. Simply take room measurements with the mic and software, send the correction filters to the external hardware processor via USB, and prepare for mixes that sound great everywhere.
Related Videos: ARC Studio Advanced Room Correction System
Measure your room in 10 minutes
The magic of the ARC Studio system begins with its ARC MEMS measurement microphone. Connect this to your audio interface via any +48-volt phantom-power-enabled input, and then it’s on to step two: fire up the ARC X software. The software guides you through every step of taking measurements from your listening position with the mic. Within a mere 10 minutes, your room’s calculations will be finished. This process can be repeated for multiple pairs of monitors or even different listening positions.
Latency and jitter-free performance
Once you’re done taking measurements, the ARC Studio’s final step involves transferring your room’s correction filters to the standalone hardware processor. This processor really makes the ARC Studio system stand above the rest. Other acoustic correction systems may use mics or software in a similar fashion to ARC, but they leech off your computer to apply their corrections. This issue can take valuable processing power away from other tasks, potentially resulting in latency or jitter. However, the ARC Studio’s external hardware processor makes this a complete nonissue. Plus, it doesn’t need to be bypassed in your DAW before bouncing mixes!
Works for any studio, any time
It doesn’t matter whether your studio centers around a DAW, a Pro Tools HDX system, or a recording console. It also doesn’t matter if you work in a music production studio or a post-production house for films, TV, or games. The ARC Studio Advanced Room Correction System from IK Multimedia is guaranteed to treat your control room now, and in the future. Updateable firmware means that whether you switch how you work or change spaces entirely, the ARC Studio system is sure to deliver accurate room correction time and time again.
IK Multimedia ARC Studio Features:
- Comprehensive all-in-1 room correction system with a measurement microphone, software, and external hardware processor
- Microphone can be powered by any audio interface with a +48V phantom power input
- Software guides you through each step and contains X-Monitor virtual monitoring profiles, sweet spot adjustments, multiple monitor/listening position setups, can define upper and lower frequency correction ranges separately, and much more
- Easily transfer correction filters and presets to the hardware processor via USB-C, with 2 USB cables included (USB-C to A and USB-C to C)
- Hardware processor features professional-grade XLR I/O, 32-bit AD/DA conversion, 96kHz internal sampling rate, and ultra-low latency/jitter/Total Harmonic Distortion (THD)
- Processor’s top-quality ESS-brand converters deliver more than 120dB of dynamic range
- DAW-based studios don’t need to bypass the processor before bouncing mixes
- Retains zero-latency monitoring configurations for studios with Pro Tools HDX systems
- Radio/TV broadcast studios can easily audition how audio will sound on multiple systems, even during live broadcasts
- Helps post-production houses mix dialogue, music, and sound FX that will translate well to all pro and consumer playback systems
- Console-based studios can also benefit from room correction even when mixing “outside the box”
- Included in the box: ARC Studio Hardware Processor, ARC MEMS measurement microphone, PSU 5V, USB-C to USB-A cable, and USB-C to USB-C cable
